Build your own offset set-neck guitar with a mahogany body, Rosewood (Engineered) fretboard with dot inlays, and dual mini-humbuckers. Features chrome hardware, adjustable bridge with stopbar tailpiece, and a classic 2 volume, 2 tone, 3-way toggle control layout. Full Specifications General Dexterity: Right-Handed Number of Strings: 6 Size: Full Size Build Difficulty: Beginner (3/10) Set-in neck has to be aligned and glued before finishing, which is the step that most affects intonation Straightforward wiring with few connections to solder Adjustable bridge sets intonation quickly once the posts are seated Body Material: Mahogany (2-3 pcs) Type: Solid Cutaway: Double Binding: None Top Veneer: None Neck Material: Mahogany Joint: Set-in Profile: C-shaped Truss Rod: Two-Way, Adjustable Scale Length: 628 mm / 24.75″ Binding: None Fretboard Material: Rosewood (Engineered) Radius: 14" / 356mm Number of Frets: 22 Fret Wire: Stainless Steel Fret Size: Medium Jumbo Inlay Shape: Dot Inlay Material: White Plastic (ABS) Headstock Shape: Standard (as in product images) Binding: None Nut: Bone Electronics Neck Pickup: Mini Humbucker Bridge Pickup: Mini Humbucker Controls: 2V, 2T, 3-Way Toggle Wiring: DIY (soldering required) Wiring Diagram: Mini Humbucker x2, 2 Volume, 2 Tone, 3-Way Toggle Output Jack: Top jack Hardware Bridge: Adjustable Bridge + Stopbar Tuners: Sealed, Diecast Pickguard: Black Knobs: Black Cavity Covers: Black Strings: Steel Finish: Chrome What's in the Box Guitar body (unfinished) Guitar neck with rosewood fretboard and dot inlays 6x chrome sealed tuners with bushings and washers 2x mini-humbucker pickups with chrome covers Chrome adjustable bridge with posts and thumbwheels Chrome stopbar tailpiece with studs 4x black knobs with chrome caps Pre-wired harness with four potentiometers and toggle switch Toggle switch with black tip Black pickguard Black rear cavity cover Black truss rod cover Output jack with retaining hardware 2x chrome strap buttons with screws Coil of grey wire Allen wrench Black instrument cable Assorted mounting screws, nuts and washers What You'll Need You will need to solder the electronics. Depending on the finish you choose, the tools below cover a standard build. For assembly: Phillips screwdriver, Allen wrench set For wiring: Soldering iron, solder, wire cutters For finishing: Sandpaper (220-600 grit), primer, paint or stain, clear coat For setup: String winder, guitar tuner, Allen wrench for truss rod and saddle height adjustment No woodworking or routing required - all cavities, holes, and channels are pre-cut.
