Italian Designed Featherweight Foam Cannon is a great economical addition to a weekend warriors arsenal. Whether you are foaming down your car on the weekend or you are a professional contract cleaner washing multiple vehicles per day, this tool will save you time and money. Simply attach the foam cannon to your pressure washer using the included fitting, fill with your desired ratio of chemical and you are up and running. NOTE A specific 1/4" Male plug may be required in order to attach the QC plug to the end of some residential pressure washer setups. MTM Hydro 1/4" plugs are standard for industrial use but many residential pressure washers such as Generac, Greenworks, Ryobi, AR Blue Clean,etc... have certain models where the coupler will not receive a plug. Not all of these brands are impacted, just certain models. If you look closely, the chamfer at the end of a plug as well as the neck is, 1.5mm shorter than some couplers may allow. Contents of the Featherweight Foam Cannon Kit: Aluminum Foam Cannon body 32 oz White Bottle 1/4" x 9" tube for drawing chemical 3.5 Orifice (1.25mm) installed in the Foamer Body 1/4" QC Plated Steel Plug Specs: Min. 1,100 psi - Max. 2,600 psi Min. 1.4 gpm - Max. 2.4 gpm Max. 140°F Note The full spectrum of ratings are not supported by the 3.5 orifice included with this kit. Other orifices may be required for higher flow machines that have lower PSI- Example: 2000 PSI with 3.5 GPM requires a 5.0 Orifice. For larger orifices, you will know it does not work because you will experience starting and stopping of the foam cannon as your unloader slips in and out of bypass. You will also get watery foam as the orifice size 3.5 is significantly smaller than the 5.0 needed for your machine. MTM Foam Cannons will not work with flow sensing unloaders as you will experience the same results listed for an under-sized orifice. See below for additional orifice sizes and replacement items available for purchase. Foam Cannon Replacement Items and Upgrades: 3.0 Orifice (1.1mm) - Part #36.5000 5.0 Orifice (1.5mm) - Part #36.0235 6.5 Orifice (1.7mm) - Part #36.0236 Replacement 9" Suction Tube - Part #41.0338 Replacement Filter - Part #36.0226 Karcher Brass Bayonet and fitting - Part #s 24.0459 & 24.0127 Purchase both Karcher Plastic Bayonet and fitting - Part #s 37.0259 & 24.0127*Purchase both*
