Introduction The Feberis Pro is the ultimate Flipper Zero accessory for IoT pentesting. Its five integrated modules cover all common IoT frequencies, including Sub-GHZ (433+900MHz) and 2.4GHz, enabling pentesting functionality for across multiple protocols, including RF, Wifi, Bluetooth and more. The Feberis Pro has full functionality out-of-the-box, and supports extended functionality via alternative firmware, and custom functionality via its open-source modules. This is the newly-released, 2026 version of the Feberis Pro from SAPSAN - and manufactured with the assistance of Lab401. The FEBERIS PRO has been field-tested used by multiple European Police, Law-Enforcement and Auditing teams. Discover the Feberis Pro Quick to deploy, the Feberis Pro is designed for rapid deployment and full-featured functionality to accompany you during all phases of RF pentesting, auditing and research. 1 2 3 4 5 6 7 1. Dual Frequency Sub-GHz Never miss a signal capture : features dual CC1101 SubGHz modules, allowing for rapid switching between frequencies. 2. WIFI + BLE Audit Comprehensive, Long-range Wifi + BLE Auditing: AP & Beacon Detection + Spoofing, Sniffing, Packet Capture & Export, Wifi Deauth, and even EvilPortal & Pineapple Detection with custom firmware 3. Integrated GPS The inbuilt GPS module enables recording pinpoint-accurate coordinates during war-driving sessions. 4. 2.4GHz Auditing Audit IoT peripherals operating on 2.4GHz with the dedicated nRF24 chipset and long-range antenna. Capture data, detect vulnerable devices, study protocols and build PoCs. 5. Complete IoT Auditing Integrates five modules, covering standard IoT + RF Remote frequencies. Allows easy switching between modules, or simultaneous modules. 6. Long-Range Antennas Each module has its own dedicated, optimised antenna, enabling hundreds of metres in line-of-sight performance. Optimised power consumption - no additional battery or power required. 7. Full Software Support Works out-of-the-box, no development required. Compatible with multiple firmware variants, and supports multiple internal firmware images for extended functionality. Detailed functionality SubGHz: Optimised Performance: Performance gains of 10x over built-in SubGHz module + antenna. Extended Range: Optimised dual-antennas allows for >100m of line-of-sight SubGHz operations. Signal Capture / Analysis: Enhanced signal capture, analysis, replay and export on dedicated dual-radios, directly from within the FlipperZero SubGHz app. Enhanced RF Remote Cloning: Dedicated off-board radio modules & optimised antennas allows for 10x performance during remote capture, emulation and cloning. Dual SubGHZ Modules: Dual CC1101 modules allowing for simultaneous RX/TX on 433MHz and 868MHz. 2.4GHz: IoT Scanning: Detect IoT devices using 2.4GHz protocols (Smart Home Devices, Mesh Networks, Drones, Remote Control Devices, etc) Protocol Analysis: Capture, decode and analyze 2.4GHz protocol traffic. IoT Vulnerability Scan: Search for potentially vulnerable IoT devices. MouseJacker: Take control over wireless mice using the 2.4GHz frequency. Wifi: AP Scanning: Detect nearby WiFi networks. Station Scanning: Monitor connected WiFi clients. Beacon Spam: Broadcast customizable SSID beacons. Deauthentication Attacks: Disconnect clients from specific networks. WiFi Capture: Log probe requests, beacon frames, deauth packets, and raw data (requires SD card or compatible storage). Evil Portal: Set up a fake WiFi portal with a custom SSID and domain. Pineapple Detection: Detect Wi-Fi Pineapples and Evil Twin Attacks. Web-UI: Built-in interface for changing settings and sending commands easily. Wifi Wardriving: Log, timestamp and geo-stamp detected APs and Beacons via inbuilt GPS. BLE: BLE Scanning: Detect BLE devices, including specialized modes for AirTags, Flipper Zeros, and more. BLE Packet Capture: Capture and analyze BLE traffic. BLE Wardriving: Map and track BLE devices in your vicinity. BLE Device Spam: Spoof/spam BLE accessories to nearby devices. BLE Wardriving: Log, timestamp and geo-stamp detected beacons and devices via inbuilt GPS. What's included 1x Feberis Pro 2x CC1101 Radio Modules (433MHz + 868MHz) NRF24 radio module (2.4 GHz) ESP32 microcontroller with BLE & WiFi (2.4 GHz) GPS module 7x Status LEDs 4x Configuration Switches 4x External Antennas 1x 433MHz : 3dBi Gain 1x 868MHz : 3dBi Gain 1x 2.4GHz (Wifi): 8dBi Gain 1x 2.4GHz (NRF): 3dBi Gain 1x GPIO Protective Cover Feberis Pro Resources Feberis Pro Official Documentation Technical Support / Updated Maurauder Firmware (For ESP-32 Module) Ghost ESP Firmware (For ESP-32 Module)
