Are you looking to extend your fence system further or purchase a larger fence run? Then you are in the right place! If you wish to extend your fence a further 1000mm? From what you already have, choose the size you require. The numbers will be laser-marked to carry on from your own fence. Our specially designed fence system is ideal for use with our MFT Tops and ULTRA MFT Workstations, as well as Festool MFT Tops, bespoke tops, or any custom-made tops with a 20mm hole. It securely fixes your fence in place, enabling repeatable cuts while preserving valuable space behind the fence. This allows your MFT top to be positioned close to a wall, maximising your workspace efficiency. The extension piece may need to be slightly trimmed once received to ensure numbers carry on from each other. Scroll down to the demonstration video below on how to use the Fence System.Due to changes in artwork, there may be some differences in laser markings. This doesn’t cause an issue with the following but might be in a slightly different position on the fence. This will only occur when buying your original fence prior to Feb 2024. If this is not suitable, we will advise you to purchase the complete fence extrusion. You will receive: 1 x 1000mm Aluminium Fence with Dual scale1x Set of Fence Dogs with Thumbscrews and T-nuts or 1x Set of MK2 Quad Fence Dogs with Thumbscrews and T-nuts1x Aluminium Flag Stop M6 - Thumbscrew (Flag Stop may come as Red, Green or Blue)3x Joining Bars1x 2.5mm Hex Key Please note:The extension piece may need slight trimming once received to ensure numbers carry on from each other. Please note that the Quad Fence Dogs do not allow you to remove your fence by detaching it from the fence. These are more suited if you have your fence permanently positioned on your MFT.If you require 3/4" Quad Fence Dogs® please add a note at the checkout before ordering.We’ve made an important update to our fence systems, and we want to take a moment to explain why this change was necessary and how it impacts you. Please click the image below to read our blog... We use the latest in CNC technology to turn our products, which are measured with an accuracy of 5 microns. Our dogs are machined to 19.96/97 +- 0.015.For revised product information, manuals, downloads, and reviews, please visit the relevant tabs above.Proudly made in Britain by Benchdog Tools 🇬🇧
