The precise cut. With the KP 65/2 trimming machine, not only perfectly flush cross cuts of the edging overhang for straight edges but also clean impacts when edging round plates are successful. Ergonomic handle location for easy, effortless trimming, even on thick edging. Patented eccentric fine adjustment for precision impact trimming. Tabletop on both sides of the trimming machine allows the user to trim left and right panel edges from above - with a perfect view of the workpiece. Trimming protruding edges after gluing. Trimming abutting edge joints when gluing round plates. Tabletop on both sides. Can be converted for impact trimming. Setting the table diameter. The trimming machine has two table supports, therefore the panel does not have to be turned during trimming; the device can simply be laid out on the right and the left.. The trimming machine can be quickly and easily converted to carry out the impact trimming function. If, for example, round plates need to be edged, it is necessary to make a clean cross cut for the abutting edge joint.. If the right setting for impact trimming is found, this can be set as a fixed value for all further panels of the same diameter. A marking is then no longer necessary. Impact trimming function (for round tables) and trimming of panel edges (final trimming) with a single machine. for trimming plastic edging with a height of 18 - 65 mm and a thickness of 0.5 - 2.0 mm (depending on material). for PVC, acrylic and thin wooden veneer edging (depending on material).
