Cut-outs to perfection. Perforated board with cut-outs for stationary use of the edge bander in the MFT multifunction table in combination with the AP-KA 65 adapter plate. For small batches, straight edges, freeform elements and gluing inclined edges, angle of 0–47°. Guide plates for guiding the workpiece safely, easy to attach via integral M4 reducing rings. Perfectly prepared cut-out for the AP-KA 65 adapter plate. Sliding strip can be used flexibly due to M4 threaded sockets. Especially steady thanks to the use of a three-layer MDF panel. Can be easily replaced by the standard perforated board when MFT is present. With cut-outs for stationary use of the edge bander in the MFT multifunction table in combination with the adapter plate AP-KA 65. For small batches, straight edges, free form elements and gluing inclined edges, angle from 0-47°. Guide plates for guiding the workpiece safely, easy to attach via integral M4 reducing rings. allows the user to swivel the machine (0 – 47°) in the bench in combination with the AP-KA 65 adapter plate and therefore position the workpiece horizontally during edging – for convenient and safe guidance, even with larger objects. for KA 65
