Key Features Fits Two Hose Sizes The brush accepts Festool D 27 and D 36 hoses and tubes, so it drops into existing dust extraction setups without extra adapters. That makes it an easy add-on if you already run Festool extractors. Wide 70 mm Opening The 2-13/16 inch diameter gives you broader pickup than a narrow crevice tool. It is a better fit for bench cleanup, cabinet interiors, and quick passes over textured surfaces. Brush + Suction Control The Festool 440404 Suction Brush combines soft bristles with vacuum pickup, helping you lift dust while staying in contact with the surface. That is useful when you need to clean without scraping or gouging. Overview The Festool 440404 Suction Brush is a vacuum accessory built for surface cleaning, bench cleanup, and getting into cabinets or other tight spaces. This is a suction brush designed for wet and dry extraction. Model Number 440404. If you already use a Festool dust extractor and want a better way to clean work surfaces, shelves, trim, vehicle interiors, or shop fixtures, this accessory makes that job faster and more controlled than using an open hose end. What matters here is the combination of a 70 mm diameter opening and a ring of bristles around the edge. The wider face covers more surface area than a narrow nozzle, while the bristles help keep the tool planted on the material as you move. In practical use, that means you can pull loose dust, chips, and debris from flat surfaces and textured areas without the nozzle grabbing too hard or skating around. The fitment is straightforward. The Festool 440404 Suction Brush is made for D 27 and D 36 hoses and tubes, so it works within the Festool dust extraction system instead of feeling like a one-off accessory. That matters if you switch between hoses, cleanup tools, and dust extractor tasks throughout the day. You can keep the same extractor and hose platform, then swap over to the brush when the job changes from dust collection at the tool to cleanup around the workspace. Festool lists this brush as suitable for wet and dry extraction, which gives it more flexibility than a cleanup accessory that is limited to dry dust only. In the shop or on site, that means it can handle more than just fine sawdust on a bench. It is a useful piece when you are cleaning up mixed debris around a work area, especially in spots where a floor nozzle is too bulky and a bare hose end is too aggressive. Build-wise, this is a simple part, but the details are what make it useful. The body is plastic, keeping the weight down to about 0.2 lb, so it does not feel awkward on the end of a hose. The compact size helps when you are working inside cabinets, around installed hardware, or across surfaces where you want contact from the brush but do not want a bulky attachment getting in the way. This vacuum brush makes the most sense for woodworkers, remodelers, installers, finish carpenters, and serious DIY users who already own a Festool extractor setup and want cleaner, more controlled cleanup. It is especially handy for dust extraction accessory use where the goal is not just collecting debris, but cleaning finished or semi-finished surfaces without beating them up. If you want a simple accessory that earns its keep every time you do final bench cleanup or interior cleanup, this is the kind of small add-on that gets used more than you think. Clean Surfaces Without Digging In The brush edge helps the nozzle stay controlled on the surface instead of snapping tight like a bare hose opening. That is a big deal when you are cleaning carpeted panels, textured liners, or finished surfaces that need contact but not abuse. Designed for bench cleanup, cabinets, and tight areas Brush-style face helps sweep and extract in one pass Works Across Your Festool Dust Setup If you already own Festool hoses and extractors, this accessory fits right into the system. The D 27 and D 36 compatibility makes it easy to switch from active dust collection at the tool to cleanup work right after the cut, sand, or install. Accepts D 27 mm and D 36 mm hoses and tubes Suitable for wet and dry extraction Festool 440404 Suction Brush Size That Actually Helps The 70 mm diameter lands in a useful middle ground. It is wide enough to cover surface area efficiently, but still compact enough to work inside shelves, boxes, cabinets, and other spaces where a larger floor or utility nozzle would be overkill. Diameter: 2-13/16 in. (70 mm) Lightweight plastic construction at about 0.2 lb What's in the Box (1) Suction Brush Key Specifications Diameter 2-13/16 in. (70 mm) Material Plastic Hose Compatibility Festool D 27 / D 36 hoses and tubes Weight 0.2 lb Overall Length 7.8 in. Overall Width 4.2 in. Overall Height 3 in. Made In Germany Compatibility Hose Fitment Compatible with Festool D 27 and D 36 hoses and tubes. System Type Built as a Festool dust extraction accessory for use with extractor hose setups rather than as a standalone cleaning tool. Built For WoodworkingRemodelingFinish CarpentryShop CleanupCabinet InteriorsBench CleanupWet and Dry ExtractionTight-Area Cleaning Pro Tip Use the brush when cleaning finished shelves, cabinet boxes, or textured interior panels where a bare hose likes to stick. The bristles keep airflow moving while letting you stay in contact with the surface, so cleanup is quicker and a lot less annoying. Warranty & Support 3 Years Limited warranty. Tool Nut's Take Tool Nut's Take Small Accessory, Real Everyday Use The Festool 440404 Suction Brush is one of those simple add-ons that ends up living on your hose because it makes cleanup faster, cleaner, and easier to control. Who it's for: Festool extractor owners, woodworkers, installers, and remodelers who do regular bench cleanup, cabinet cleanup, or detail cleaning in tight spaces. Why it stands out: The D 27 / D 36 fitment makes it easy to integrate into an existing Festool setup, and the 70 mm brush head gives you useful surface coverage without getting bulky. Worth knowing: This is a focused cleanup accessory, not an all-purpose floor tool. If your work involves detail cleanup on surfaces and interiors, that is exactly why it is worth having. Common Questions What hoses does it fit? It is suitable for Festool D 27 and D 36 hoses and tubes. Can it be used for wet and dry extraction? Yes. Festool lists it for wet and dry extraction. What is the brush made from? The body is plastic. Where is it made? It is made in Germany.
