Key Features Fast Cam Locking Cam-action levers make it quick to lock down a workpiece and just as quick to release it. That saves setup time when you are moving from sanding to routing to cutting on the same table. Low Profile Hold The low profile design applies lateral clamping force at the edge of the material, so the top of the work stays open for routing, sanding, sawing, or drilling without the clamp getting in the way. MFT Fit The Festool 488030 Clamping Elements, 2-pack is built to fit the 20 mm hole pattern on Festool MFT tables. If you already work on an MFT, this is the clean way to secure odd shapes and edge work. Overview The Festool 488030 Clamping Elements, 2-pack is a specialty clamp set for securing workpieces on a Festool multifunction table. This is a clamp designed for holding material in place during routing, sanding, sawing, and drilling on an MFT work surface. Model Number 488030. If you use a Festool MFT and want a secure hold without a tall clamp body sticking up into your work area, this is the right accessory. What makes these clamping elements useful is how they work with the table instead of fighting it. The clamps fit the 20 mm hole pattern used on Festool MFT tables, and the low profile layout applies lateral pressure from the edge of the workpiece. In plain terms, you can hold a panel, round workpiece, or irregular shape firmly while keeping the top surface clear for your sander, router, saw, or drill. The cam-action levers are a big part of the appeal. They let you lock down material quickly and release it just as fast when it is time to reposition the work. That matters when you are doing repeated setups or moving through multiple operations on the same part. Festool also uses rubber-padded clamp surfaces, which helps grip the material securely without being overly harsh on the finished face. These clamps are especially useful when standard bar clamps or taller hold-downs would block your tool path. On an MFT, that low profile gives you more usable space and fewer obstructions around the workpiece. For sanding a round panel, trimming an edge, or routing a profile, that clean working area is a real advantage, not just a nice feature on paper. In terms of build, the listed materials are plastic, metal, and rubber, which makes sense for an accessory that needs rigid clamping parts, a comfortable operating lever, and padded contact points. The listed length is 12 inches, and assembled weight is about 1 lb, with product weight also shown around 1.6 lb from another source, so this is a compact accessory set that is easy to keep with your MFT setup instead of dragging around a separate clamping solution. System fit is the main reason to buy this set. These clamping elements are designed for the Festool MFT Multifunction Table platform, and supplementary compatibility data specifically calls out the MFT/3 Multifunction Table, MFT/3-Kapex Multifunction Table, and MFT/3 Multifunction Table Basic. If your workflow is built around the Festool table system, these give you a more purpose-built way to secure stock than general clamps. This set is a strong fit for woodworkers, cabinet installers, trim carpenters, and serious DIY users who already own an MFT and want cleaner setups for precision work. If you do not use a Festool MFT or another table with the same 20 mm hole pattern, these are much less compelling. But if you do, the value is pretty straightforward: faster workholding, better access to the workpiece, and a neater table layout when accuracy matters. Keep the Work Surface Clear These clamps are built for one of the biggest headaches on a multifunction table: holding the work securely without putting hardware in the tool path. Their low profile leaves more room above the material for sanding, routing, or cutting. Designed to provide lateral clamping force on the material edges Useful for precision routing, sanding, cutting, and drilling applications Hold Odd Shapes with Less Fuss Round parts and awkward shapes can be annoying to secure with standard clamps. The rubber-padded contact surfaces and cam-action design make these a cleaner solution when the workpiece is not a simple square board. Rubber-padded clamp surfaces improve grip on different workpiece shapes Cam-action levers allow quick locking and quick release between setups Festool 488030 Clamping Elements, 2-pack for the MFT System This is not a generic bench clamp. It is a Festool table accessory made to fit the 20 mm MFT hole pattern, which is why it works so well in that system and why it makes the most sense for users already committed to an MFT setup. Designed for a perfect fit with the 20 mm holes of the Festool MFT Compact specialty clamp format for table-based workholding What's in the Box (2) Clamping Elements (2) 20 mm Bench Dogs (4) Locking Knobs Key Specifications Tool Type Specialty Clamp Model Number 488030 Fitment 20 mm Festool MFT hole pattern Length 12 in Weight 1.6 lb Material Plastic, Metal and Rubber Piece Count 2 clamping elements Made In Germany Compatibility Table Interface Designed for a perfect fit with 20 mm holes on Festool MFT multifunction tables. Festool MFT System Listed for use with the Festool MFT Multifunction Table system. Compatible Tables Supplementary compatibility data references the MFT/3 Multifunction Table, MFT/3-Kapex Multifunction Table, and MFT/3 Multifunction Table Basic. Built For WoodworkingCarpentryCabinet WorkRemodelingRoutingSandingSawingDrilling Pro Tip Use these when you need the top face of the workpiece completely open, especially for sanding or routing on the MFT. The low profile side pressure is the whole point here, so they are often a better choice than a taller hold-down when the tool needs full access across the surface. Warranty & Support 3 Years Limited warranty. Tool Nut's Take Tool Nut's Take A smart add-on for anyone who actually uses an MFT The Festool 488030 Clamping Elements, 2-pack solves a real workholding problem on multifunction tables by keeping the clamp low, fast, and out of the way. Who it's for: Woodworkers, trim guys, cabinet installers, and serious DIY users already working on a Festool MFT table. Why it stands out: The cam-action design is quick to use, and the low profile side clamping keeps the work surface open for sanding, routing, drilling, and cutting. Worth knowing: This is a system accessory, not a universal clamp. If you do not have a table with the proper 20 mm MFT hole pattern, you will not get the full value out of it. Common Questions What is this product used for? It is used to secure a workpiece for routing, sanding, sawing, drilling, and similar operations on a Festool MFT multifunction table. Will it fit standard Festool MFT tables? It is designed for the 20 mm holes of the Festool MFT, and supplementary data also references compatibility with the MFT/3, MFT/3-Kapex, and MFT/3 Basic tables. Why use these instead of a regular clamp? The low profile design applies lateral clamping force at the material edge, which helps keep the top of the workpiece clear for tool access.
