Key Features Parallel Rip Cuts The Festool 491469 PA-TS 55 Parallel Side Fence gives your TS 55 or TSC 55 saw a fixed reference for repeatable parallel cuts without relying on an FS guide rail every time. Mounts Both Sides It attaches to either side of the saw, so you can set up for short side or broad side cuts based on the material and the direction that makes the cut easier to control. Jobsite-Tough Build The aluminum and steel construction keeps the guide rigid where it matters, while the included hardware is there to get you set up fast instead of piecing together a workaround on site. Overview The Festool 491469 PA-TS 55 Parallel Side Fence for TS 55 / TSC 55 is a saw guide accessory built to help you make guided, parallel rip cuts with compatible Festool plunge cut saws. This is a parallel side fence designed for parallel cutting and repeatable rip work without depending on FS guide rails. Model Number: 491469. If you use a TS 55-series saw and need straight, consistent offsets from an edge, this is the accessory that makes that setup faster and more repeatable. What matters here is not just that it bolts onto the saw, but what that changes on the job. Instead of measuring, marking, and checking the same offset over and over, the fence creates a physical reference off the edge of the workpiece. That saves time on repeated cuts and helps keep narrow rips more consistent. Festool lists rip capacity from the blade side up to 11-13/16 inches (300 mm) and from the motor side up to 3-3/4 inches (95 mm), which gives you useful range for trimming sheet goods and handling narrower stock. The design is straightforward in the best way. The guide mounts to both sides of the saw, so you can configure it for short side or broad side cuts depending on how the material is laid out and which side gives you better support. That flexibility matters when you're working in a shop one day and on a remodel the next. It also means you can set the saw up around the cut instead of fighting the setup. Festool calls out sturdy aluminum and steel construction, and that is exactly what you want in an accessory like this. A parallel guide only helps if it stays rigid and holds its setting. The aluminum body keeps weight reasonable, while the steel components handle the clamping and support duties where strength matters more. At about 1.6 pounds, it adds function without turning the saw into something awkward to handle. Another practical advantage is that this accessory lets the saw work independently of Festool FS guide rails for this specific type of cutting. That does not replace a guide rail for every application, but it does give you another way to work when a rail is not the most efficient choice. For repetitive parallel cuts, that can be the faster setup. Festool also notes that it can be used as a table extension, which adds a little more utility for supporting material during certain cuts. Compatibility is the key buying point, and this part is specifically suited for Festool TS 55, TS 55 R, TS 55 F, TSC 55, TSC 55 K, and TSC 55 KS saws. If you are already on that platform, the PA-TS 55 makes a lot of sense because it expands what the saw can do without changing the way the saw feels in use. If you do not own one of those saws, this is not a universal guide rail replacement or a generic edge guide. It is a purpose-built Festool accessory for those models. This accessory is best suited to woodworkers, finish carpenters, cabinet installers, remodelers, and serious DIY users who want cleaner workflow on repeat rip cuts. If your work regularly involves cutting panels or making repeated offsets from a straight edge, the value is real. If most of your cuts are one-off breakdown cuts done on a rail, you may not reach for it as often. For the right user, though, this is one of those accessories that saves enough setup time to earn its spot quickly. Set Up Repeatable Cuts Faster If you are doing repeated edge-based cuts, this accessory is about efficiency. Once the fence is set, you can work off the material edge instead of resetting a rail position for every similar cut. Designed for guided, parallel cutting with compatible TS 55 and TSC 55 saws Works independently of FS guide rails for this type of rip cutting task Festool 491469 PA-TS 55 Parallel Side Fence Built for Flexible Mounting The hardware and two-sided mounting layout make this easier to adapt to different cut orientations. That is useful when the workpiece, saw position, or access around the bench changes from job to job. Can be used on both sides of the saw for short side and broad side cuts Includes through bolts and clamp for quick setup Key Specifications Material Aluminum and steel Weight (lbs) 1.6 lbs Rip Capacity, Blade Side 11-13/16 in (300 mm) Rip Capacity, Motor Side 3-3/4 in (95 mm) Accessory Type Parallel side fence Model Number 491469 Made In Germany Compatibility Compatible Saws Suitable for Festool TS 55, TS 55 R, TS 55 F, TSC 55, TSC 55 K, and TSC 55 KS plunge cut saws. Use Case Made for parallel rip cutting with compatible Festool saws when you want to work independently of FS guide rails. Built For WoodworkingCabinet InstallationFinish CarpentryRemodelingPanel CuttingParallel Rip Cutting Warranty & Support 3 Years Limited warranty. Tool Nut's Take Tool Nut's Take A simple accessory that saves real setup time The Festool 491469 PA-TS 55 Parallel Side Fence is the kind of saw accessory that looks basic until you start doing repeat cuts and realize how much measuring and repositioning it takes out of the day. Who it's for: TS 55 and TSC 55 users doing repeat parallel cuts in sheet goods, cabinet parts, trim stock, or shop work. Why it stands out: Two-sided mounting, solid aluminum and steel construction, and the ability to make parallel cuts without leaning on the FS rail system for every setup. Worth knowing: This is a purpose-built Festool accessory, so the value is highest if you already own one of the listed compatible plunge saws and actually do repeat rip work. Common Questions What does this accessory do? It gives compatible Festool plunge cut saws a parallel reference fence for guided rip cuts from the edge of the workpiece. Does it require an FS guide rail to work? No. Festool states it enables parallel cutting with the TS saw independent of the FS guide rails. Which saws does it fit? Festool lists TS 55, TS 55 R, TS 55 F, TSC 55, TSC 55 K, and TSC 55 KS. How much cutting capacity does it provide? Festool lists up to 11-13/16 inches (300 mm) from the blade side and up to 3-3/4 inches (95 mm) from the motor side.
