Key Features Cut With Repeatability The guide rail, fence, and miter setup turn this table into a cutting station for accurate, repeatable crosscuts, angle cuts, and routing work. That matters when you need clean results without building a separate shop fixture. Clamp Anywhere The perforated top and side profiles give you fast, flexible clamping for sanding, assembly, trimming, and workholding. Uniform holes save setup time and make it easier to secure odd-shaped parts. Portable MFT/3 Setup The Festool 495315 MFT/3 Multifunction Table folds down for transport, sets up at full working height, and can also be used low with the legs folded away. It is built for shop precision without giving up jobsite mobility. Overview The Festool 495315 MFT/3 Multifunction Table is a portable precision work surface built for cutting, clamping, sanding, routing, and assembly. This is a multifunction table designed for accurate workholding and guided cutting with Festool track saws and routers. Model Number 495315. If you need one station that can move from the shop to the jobsite and still stay square, stable, and useful for more than one task, this is exactly what this table is for. What makes the MFT/3 different from a generic folding work table is the way it supports actual precision work. The perforated top is not just there to hold clamps. It creates a consistent grid for repeatable positioning, while the side profiles and V-groove channels help with fence alignment, miter gauge squaring, and accessory mounting. Paired with the included guide rail and support hardware, the table becomes a compact cutting platform for crosscuts, angle cuts, compound cuts, dados, flutes, and layout-driven trim work. On the practical side, the working height is set up for comfort when the legs are unfolded, and the table can also be used with the legs folded away when you want a lower setup. Festool lists the full-height table at 35 inches and the folded-leg height at 7 inches. That gives you flexibility whether you are breaking down material in a shop, setting up a temporary workstation on site, or working low when stability matters more than standing height. The physical design is aimed at real work, not showroom use. The top is replaceable, which matters because a multifunction table top is supposed to get used, clamped to, and cut against. Festool also calls out the compact size and lighter weight as a reason it works well on jobsites. At 61.73 pounds, it is not featherweight, but it is realistic for a serious portable workstation that still needs to stay put while guiding a saw or holding a panel flat. This table also solves a common problem with portable setups: instability and awkward workholding. Slip-resistant feet help reduce drift, one leg can be adjusted to level the table on uneven ground, and the side channels open up more clamping options than a flat bench top alone. That is the difference between a table you occasionally use and one that becomes part of your everyday workflow for sanding doors, trimming panels, routing joinery, or assembling finished parts. Compatibility is one of the big reasons people buy into the MFT/3 platform. It is built to work with Festool guide rails, Festool clamps, TS plunge saws, and Festool routers. If you already own Festool rail-guided cutting or routing tools, this table gives them a more controlled, repeatable home base. If you do not, the table still works as a very capable clamping and assembly station, but the real value shows up when you use it as part of the larger Festool system. Who is this for? Woodworkers, finish carpenters, cabinet installers, remodelers, and serious DIY users who care about clean cuts and fast setup will get the most from it. It is especially useful for people working in smaller shops or in mobile setups where a full dedicated bench and panel saw station are not practical. If your work involves track saw cutting, sanding large pieces, clamping awkward parts, or accurate routing support, the MFT/3 earns its footprint fast. Built for Guided Cutting If you cut sheet goods, panels, or finished material with a track saw, this setup makes the job cleaner and more repeatable than balancing material on sawhorses. The rail support and fence system help you control alignment so you spend less time measuring and rechecking. Works with Festool guide rails, TS plunge saws, and routers Supports cut-offs, angle cuts, compound cuts, dados, and flutes Clamp Fast Without Building Fixtures The hole pattern and edge profiles make this table a serious workholding station for sanding, trimming, and assembly. Instead of chasing parts around the bench, you can pin them down quickly and keep both hands on the task. Uniform perforated top helps speed up clamping and positioning Side channels and V-groove profiles add more ways to secure accessories and workpieces Handles Shop Work and Jobsite Work This is not just a shop table with folding legs. It is designed to travel, set up fast, and stay useful in uneven real-world conditions. That makes it a good fit for installers and remodelers who need precision away from the bench room. Foldaway legs allow full-height use or low-position setup One adjustable leg helps level the table on uneven surfaces What's in the Box (1) Table with perforated top and foldaway legs (1) Swivel unit (1) Support unit (1) CMS Router Table Miter Gauge (1) Adjustable Stop MFT/3-AR (1) Guide Rail FS 1080/2 (1) Deflector FS-AW (1) Additional clamp MFT/3-ZK Key Specifications Table Dimensions 45 in x 30 in (1,157 x 773 mm) Weight 61.73 lbs (28 kg) Load Capacity 264.56 lbs (120 kg) Table Height, Legs Unfolded 35 in (900 mm) Table Height, Legs Folded Away 7 in (180 mm) Max. Workpiece Width 27 in (700 mm) Max. Workpiece Thickness 3-5/64 in (78 mm) Made In Germany Compatibility Guide Rail SystemDesigned to work with Festool guide rails for controlled crosscuts, angle cuts, and repeatable layout work. Track Saw SupportBuilt for use with Festool TS plunge saws when paired with the guide rail setup. Router ApplicationsSupports Festool routers for guided routing tasks such as dados, flutes, and edge-based layout work. Clamping AccessoriesWorks with Festool clamps and table accessories through the perforated top, side channels, and V-groove profiles. Built For Woodworking Finish Carpentry Cabinet Installation Remodeling Panel Cutting Routing Sanding Assembly Work Pro Tip If you are setting up on a remodel site, level the table first with the adjustable leg before you square the fence and rail. That keeps your cuts consistent and saves you from chasing accuracy problems that are really just floor problems. Tool Nut's Take Tool Nut's Take Why the Festool 495315 MFT/3 Multifunction Table Still Has a Loyal Following This is one of those setups that makes more sense the more precision work you do outside of a permanent bench. Who it's for: Woodworkers, finish carpenters, cabinet guys, and serious DIY users who want a portable work table that does more than just hold material. Why it stands out: The rail-guided cutting support, repeatable fence setup, and fast clamping options turn it into a real workstation instead of a folding table with holes in it. Worth knowing: It is a premium table and it earns that price when you actually use the Festool system. If you just need a basic assembly table, this is probably more table than you need. Common Questions Is this just a work table, or can it be used for cutting? It is designed for both. The MFT/3 supports guided cutting with Festool guide rails and TS plunge saws, and it also works as a clamping, sanding, routing, and assembly station. Can the table be used on uneven ground? Yes. One leg can be adjusted to help level the table on uneven surfaces. Is the top replaceable? Yes. The perforated insert plate is replaceable, which is useful because the top is intended to be used as a sacrificial work surface. How much weight can it support? Festool lists the load capacity at 264.56 pounds.
