Key Features Full-Extension Access The drawer slides all the way out so you can open a Systainer lid without pulling the case off the shelf. That makes access faster and keeps your storage setup cleaner and more organized. 44 lb Capacity Each drawer is rated for up to 44.09 lbs (20 kg), which is enough for loaded Systainers and daily shop use. If you are building your own Sysport-style cabinet, that load rating matters. Built for SYS-AZ Storage The Festool 500692 SYS-AZ Pull Out Drawers are made for custom cabinet builds using a 32 mm hole pattern. That gives you a clean way to store Systainer3 M, T-LOC, and Classic cases in a shop or van setup. Overview The Festool 500692 SYS-AZ Pull Out Drawers are a pull-out storage drawer system for building your own Systainer cabinet or Sysport-style organizer. This is a pull-out drawer designed for custom Systainer storage and access. Model Number 500692. If you want your Systainers stored in a fixed cabinet but still easy to open and reach, this is the hardware that makes that setup work. What matters most here is the full-extension slide design. Instead of stacking Systainers on shelves and removing them every time you need what is inside, the SYS-AZ drawer lets the case slide forward so the lid can be opened while it is still in the cabinet. That saves time in the shop, keeps your workstation tidier, and makes a custom storage wall feel a lot more like a purpose-built system instead of a homemade workaround. Festool designed this drawer around 32 mm cabinet construction, which is a big deal if you are building modular shop furniture or fitting out a work van with repeatable spacing. The official installation dimensions call for a cabinet box width of 16-13/16 inches (427 mm) and a depth of 14-31/32 inches (380 mm) or greater, with minimum clearances below the bottom drawer and above the top drawer. In plain terms, it is made to fit into a clean, planned storage build, not just dropped into any random box. The drawer itself measures 17 inches long by 15 inches wide by 2-1/4 inches high, and it is rated to carry up to 44.09 lbs (20 kg). That gives it enough capacity for loaded Systainers used in real shop work. If you are storing abrasives, layout gear, fasteners, or compact power tool kits inside Festool cases, the capacity is where you want it to be for daily use. Compatibility is one of the reasons this accessory matters. The SYS-AZ is suitable for Systainer3 M, T-LOC, and Classic Systainers. That means it works across multiple generations of Festool storage rather than locking you into just one case style. There is also an optional drawer lock available if you want more security in a cabinet, trailer, or mobile setup. Who is this for? Cabinetmakers, carpenters, finish guys, installers, and serious DIY users who already run Systainers and want a cleaner storage system. It is also a good fit for anyone building a custom shop cabinet and trying to avoid wasted motion. If you do not use Festool Systainers, this will not make much sense. If you do, it is one of those accessories that makes the whole storage system work the way it should have from the start. Open Your Systainer Without Removing It This is the real advantage of the SYS-AZ setup. The slide extends far enough that the Systainer lid can be opened while the case is still sitting in the drawer, so you get fast access without lifting cases in and out all day. Full-slide design supports lid opening while the Systainer remains in place Built for custom storage where speed and organization matter Build a Cleaner Custom Cabinet If you are building your own Sysport-style cabinet, these drawers give the project structure. They are designed around a 32 mm hole grid, which makes layout more predictable and repeatable when you are planning multiple drawer positions. For use in do-it-yourself Sysport construction Official installation width is 16-13/16 in with 14-31/32 in or more depth Works Across Multiple Systainer Generations This is not just for one legacy case style. The SYS-AZ is suitable for Systainer3 M, T-LOC, and Classic Systainers, which makes it easier to organize mixed case collections without rebuilding your storage around a single generation. Suitable for Systainer3 M, T-LOC, and Classic Systainers Optional drawer lock available for added security What's in the Box (1) Festool SYS-AZ Pull-Out Drawer Systainers are sold separately. Optional drawer lock is available separately. Key Specifications Dimensions (L x W x H) 17 in x 15 in x 2-1/4 in (425 x 376 x 57 mm) Maximum Load 44.09 lbs (20 kg) Required Cabinet Width 16-13/16 in (427 mm) Required Cabinet Depth 14-31/32 in (380 mm) or more Bottom Clearance 1/2 in (13 mm) minimum Top Clearance 5/16 in (8 mm) minimum Material Plastic Made In Germany Compatibility Systainer PlatformSuitable for Festool Systainer3 M, T-LOC, and Classic Systainers. Cabinet SystemDesigned for custom cabinet construction using a 32 mm hole grid system. Accessory OptionOptional drawer lock is available for users who want added security. Built For Cabinet Storage Builds Workshop Organization Mobile Tool Storage Finish Carpentry Woodworking General Contracting Festool Systainer Users DIY / Hobbyist Pro Tip Build your cabinet to Festool's exact width requirement first, then lay out drawer spacing around your tallest Systainers. The slide works best when the cabinet box is square and the top and bottom clearances are kept to spec. Warranty & Support 3-year limited manufacturer's warranty. Tool Nut's Take Tool Nut's Take Festool 500692 SYS-AZ Pull Out Drawers make custom Systainer storage actually practical If you already store tools in Festool cases, this is one of those small accessories that changes how usable your cabinet setup feels every day. Who it's for: Pros and serious DIY users building a dedicated Systainer cabinet, shop wall, or mobile storage setup. Why it stands out: The full-extension slide lets you open the Systainer right in the drawer, which is the whole point. You get access without the shuffle. Worth knowing: This is not a generic drawer slide kit. It is made for specific cabinet dimensions and Festool case compatibility, so measure your build before you start cutting plywood. Common Questions What Systainers does this drawer fit? It is suitable for Festool Systainer3 M, T-LOC, and Classic Systainers. How much weight can one drawer hold? The maximum load is 44.09 lbs (20 kg). Can the Systainer lid open while it is still in the drawer? Yes. The SYS-AZ uses a full-slide design so the Systainer lid can be fully opened while in the drawer. What cabinet size does it require? Festool specifies a cabinet box width of 16-13/16 in (427 mm) and a depth of 14-31/32 in (380 mm) or greater, plus minimum top and bottom clearances.
