Choose from the following recommended battery options in pull-down menu above: 4.0 Ah Starter Set (2x batteries & 1x TCL6 charger) 4.0 Ah Energy Set in Systainer (4x batteries & 1x TCL6 DUO charger) OR click to view all batteries options Powerful. Versatile. With four gears for every application. And with the best gear change you have ever operated. Whether you are working on wood, metal or masonry – thanks to the axial hammer feature that can be switched on: The TPC is extremely durable and, thanks to its brushless EC-TEC motor, has extreme resilience and endurance. The large number of attachments, combined with perfectly matched accessories, make the QUADRIVE an unrivaled hammer drill for a wide range of possible uses. Maintain control with our intelligent Kickbackstop which helps to minimize the risk of the drill twisting out of your hand. We are confident that this is the best drill that Festool has ever built! Includes TPC 18 Drill Centrotec Chuck Centrotec Bit Holder FastFix Keyless Chuck Auxiliary Handle Belt Clip All packed in SysGen3 Systainer DF M187 Specifications Drilling diameter in brickwork: 3/8" (10 mm) Min. drilling diameter, steel: 1/2" (13 mm) Chuck range: 1/16"-1/2" (1.5-13 mm) Torque adjustment 1st/2nd gear: 17.7 in-lb - 177i n-lb (2-20 Nm) / 17.7 in-lb - 177in-lb (2-20 Nm) Battery voltage: 18 V Weight with battery: 4.18 lbs (1.9 kg) Max. torque, wood/steel: 442.5 in-lb/663.8 in-lb (50/75 Nm) Strengths & Benefits Robust: Resilient four-speed metal gearbox, also fully covered by the comprehensive support provided by Festool Service The depth stop and eccentric adapter also enable depth-limited screwdriving and screwdriving close to edges Mobile: The QUADRIVE comes in a Systainer3 and so can be seamlessly integrated along with other Systainer-based products for easy carry or fitted to a CT Mobile Dust Extractor, MW 1000 Mobile Workcenter, SYS-Cart, or SYS-Roll Versatile: Thanks to the FastFix interface, quick conversion without the need for tools for drilling, screwdriving, angular drilling and angu- lar driving Powerful for work with screws and drills with larger diameters, rapid for clean work progress when working with small diameters Maximum performance: Thanks to the extremely powerful, brushless, and therefore long-lasting, EC-TEC motor The QUADRIVE with four gears for every working situation: From screwdriving with 442.5 in-lb (50 Nm) torque in first gear to precise drilling at 3600 rpm in fourth gear For an even wider range of applications: Hammer function that can be activated for drilling into masonry Main Applications For improved control The electronic kickback stop helps to prevent excess twisting if the drill suddenly becomes caught or jammed, therefore ensuring improved control when working. Optimized gear changing Fast, safe, direct! Switching in any direction – from any gear straight to any other, without intermediate stages. Clearly marked gear positions with solid engagement. The QUADRIVE – four gears, with the right one for every application 1st gear: Demanding tightening of screws up to 3/8“ (10 mm). 2nd gear: Quick driving up to 5/16” x 11-13/32” (8 x 300 mm) in size. 3rd gear: Powerful drilling with auger bits of up to 3/4“ (20 mm). 4th gear: Fast drilling with small and medium-sized drill bits for pilot holes. Increased power in 2nd gear 40% more torque compared to the previous model for greater rotational torque with 5/16" (8 mm) screws. Unique system with perfect system compatibility Thanks to the smart FastFix interface, you can use all of the 18 V attachments from the Festool range and therefore benefit from the system advantages. No other cordless hammer drill offers this much variety! Latest generation of brushless EC-TEC motors The brushless EC-TEC motor is wear-free and converts the energy from the battery into optimum power with virtually no losses. The electronic motor management also guarantees maximum service life: Microprocessors monitor and control the temperature, voltage and current consumption of the motor, electronics and battery. The latest generation of EC-TEC motors provides more torque and speed under load. CENTROTEC tool chuck – for even faster bit changes For instantly changing between drilling, countersinking and driving: The CENTROTEC tool chuck, which has proven itself since 2001, is a chuck and bit holder in one. Even though it is half the size and weighs 80% less than a standard chuck. Practical attachments with quick angle adjustment Very quick angle adjustment simply by rotating the green ring. The attachment doesn't need to be removed from the machine. Even the eccentric adapter for driving close to edges is equipped with quick angle adjustment. Perfect ergonomics – both compact and powerful Thanks to its smaller circumference, the optimised handle ensures improved ergonomics and easier handling. Convenient for day-to-day use Optimized torque adjustment to meet specific demands. A robust belt clip that can be attached on both sides and a bit holder for secure and magnetic bit storage at the side of the drill.
