Key Features More Accurate Rail Work The angle stop, limit stop, and rail connectors help turn a standard guide rail setup into a more repeatable cutting and routing system. That means faster setup and fewer do-overs when you need straight, predictable results. One Kit, One Systainer This Festool 577157 Guide Rail Accessory Kit w/ Systainer3 keeps the core FS/2 accessories in one organized case. You spend less time hunting for small parts and more time actually cutting. Cleaner, Smoother Movement The included deflector helps keep the hose and cord from catching at the end of the guide rail. That small detail matters when you are trying to keep a cut smooth and uninterrupted. Overview The Festool 577157 Guide Rail Accessory Kit w/ Systainer3 is a guide rail accessory kit built to expand what you can do with Festool FS/2 guide rails. This is a guide rail accessory kit designed for more accurate cutting, cleaner routing, and better jobsite organization. Model number 577157. If you already rely on a Festool guide rail for track saw or router work, this set gives you the accessories that make setup faster, cuts more repeatable, and transport a lot less messy. What makes this kit useful is that it brings together the accessories most users end up wanting anyway: an FS-WA angle stop, FS-RSP limit stop, FS/2-AW deflector, (2) FSV/2 guide rail connectors, and (2) FSZ 120 screw clamps, plus the combination hex key and a SYS3 M 137 Systainer to keep everything together. Instead of buying pieces one at a time and tossing them in separate boxes or drawers, you get one organized kit that stays ready to go. On the job, those accessories solve real problems. The angle stop quickly attaches to the guide rail without tools and lets you set angles from -60° to +60°, which is a big deal for repeatable angled cuts and layout work. The rail connectors let you align and join two guide rails with more confidence when you need a longer cutting path. The fastening clamps help secure the workpiece so the rail stays where it belongs instead of shifting when you lean into the saw or router. The limit stop is one of those parts that sounds small until you use it. It can act as a start and stop reference, and Festool also calls out its role in helping protect the circular saw user against kickback when plunging into the workpiece. For anyone doing repeated plunge cuts, grooves, or controlled entry points, that added reference makes the setup more predictable and easier to trust. The deflector is another practical upgrade. It helps prevent the suction hose and power cord from hanging up on the end of the guide rail, which keeps movement smoother through the cut. If you run a dust extractor with your saw or router, that matters more than it sounds. Snagged hoses slow you down, throw off your rhythm, and can affect the quality of the cut. Festool also did the smart thing by packing everything into a Systainer instead of treating storage like an afterthought. The accessories are stored in a clearly organized layout inside the SYS3 M 137, so you can see what is there, spot what is missing, and move the whole kit as one unit. That matters for shop organization, van storage, and keeping small rail parts from disappearing between jobs. Compatibility is straightforward. This set is listed as suitable for FS/2, so it is intended to work within Festool's FS/2 guide rail system. It is a strong fit for woodworkers, cabinet installers, finish carpenters, remodelers, and serious DIY users who already own Festool guide rails and want more control over straight cuts, angled cuts, and guide rail handling. If you use a guide rail only once in a while, this may feel like a convenience upgrade. If you use one regularly, it is more than that. The right stops, clamps, and connectors cut down setup time, improve consistency, and make the whole rail system easier to live with day to day. Turn Your Guide Rail Into a More Complete Cutting System This kit is about making the guide rail system do more with less setup drama. Instead of piecing together accessories as you need them, you get the core parts for straighter cuts, repeatable angles, and better control in one case. Built around accessories for Festool FS/2 guide rails Useful for both saw cutting and router groove work Keep Hose and Cord Snags Out of the Cut The included deflector is a small accessory that fixes an annoying problem. By helping keep the hose and cable from catching at the rail end, it lets you finish the pass without interruption. Supports smoother guide rail travel when using dust extraction Helps reduce hang-ups that can interrupt a cut or groove Connect Rails with Better Alignment When a single rail is not long enough, the included FSV/2 connectors help you join two rails and line them up with more confidence. That is a big help for long sheet goods and extended cut paths where straightness matters. Includes (2) FSV/2 guide rail connectors Combination hex key is included for setup Clamp Down for Cleaner, More Stable Work The included screw clamps help lock the workpiece and guide rail setup in place so you are not relying only on hand pressure or friction strips. That extra stability is especially useful on narrow parts, awkward setups, or repeated cuts. Includes (2) FSZ 120 screw clamps Tool Nut listed clamp size: 4-11/16 in What's in the Box (1) FS-WA Angle Stop (2) FSV/2 Guide Rail Connectors (2) FSZ 120 Screw Clamps (1) FS/2-AW Guide Rail Deflector (1) FS-RSP Limit Stop (1) SW 5/SW 3 Combination Hex Key (1) SYS3 M 137 Systainer Key Specifications Product Type Guide rail accessory kit Guide Rail Compatibility For Festool FS/2 Angle Range -60° to +60° Screw Clamps Included 2 Guide Rail Connectors Included 2 Clamp Size 4-11/16 in Storage Case SYS3 M 137 Systainer Made In Czech Republic Compatibility Guide Rail Platform Suitable for Festool FS/2 guide rails. Dust Extraction Setup The included deflector is designed to help manage the hose and cord at the end of the guide rail during use. Systainer System Festool notes that the Systainer can be connected with other Systainer generations, mobile dust extractors, and other system accessories. Built For WoodworkingCabinet InstallationFinish CarpentryRemodelingPanel CuttingGuide Rail FasteningAngled CutsRouter Grooves Pro Tip If you regularly break down sheet goods with joined rails, keep the two FSV/2 connectors and the combo hex key in the same spot in the Systainer every time. It sounds basic, but it saves setup time and keeps rail alignment hardware from walking off between jobs. Warranty & Support No manufacturer's warranty is listed in the provided product data. Tool Nut's Take Tool Nut's Take Festool 577157 Guide Rail Accessory Kit w/ Systainer3 makes the rail system feel complete If you already own Festool FS/2 guide rails, this is the kind of kit that saves time every time you set up, not just once in a while. Who it's for: Woodworkers, cabinet installers, finish carpenters, and remodelers who use an FS/2 rail often enough to care about repeatability and cleaner workflow. Why it stands out: You get the accessories that actually improve day-to-day guide rail use, including clamps, connectors, angle stop, deflector, and limit stop, all packed in a proper Systainer. Worth knowing: This is an accessory set, not a guide rail or saw. It makes the most sense for users who already have the Festool rail system and want to get more out of it. Common Questions What guide rail system is this kit made for? It is listed as suitable for Festool FS/2 guide rails. What angle range can the angle stop set? The angle stop can be set from -60° to +60°. Does this kit help with hose management? Yes. The included FS/2-AW deflector is designed to help keep the suction hose and cable from catching on the end of the guide rail. Can it help extend rail length? Yes. The kit includes (2) FSV/2 guide rail connectors for joining and aligning two guide rails.
Related
Related
Related
Related