Now shipping V 1.7 New in 1.7: Latest STM32G473 Processor - More powerful processor than V1.1 New Gyro: IIM-42652 SPI Improved IO Protection: All IOs of microcontroller protected against voltage or current spikes New Firmware: FETtec ALPHA FC Firmware (KISS FC Firmware Flashable) The next generation of FETtec's popular KISS flight controller has arrived! Featuring the latest STM32 G4 MCU with math accelerator for the ultimate in flight performance, IIM-42652 gyro, 2 dedicated BECs for 5V and 16V switchable power, DSHOT2400 outputs for support of up to 8 motors, and dual 20x20 and 30x30 mounting holes. Specifications: Latest STM32G473 Processor 180Mhz + Math accelerator Gyro IIM-42652 SPI Supply voltage 6-27V (2S-6S Lipo) 2x dedicated onboard BEC (2A each) 5V BEC for RX 5V/16V BEC for VTX (switchable and real Pit*) Improved IO protection All IOs of the microcontroller e.g. in connectors or solder pads are protected against voltage or current spikes 2x 8 pin connector for solder free ESC connection Connector 1: ESC signal 1-4, telemetry, VCC, GND Connector 2: ESC signal 5-8 (depending on UAV type 1-4), telemetry, VCC, GND 1x 8 pin connector for solder free VTX, cam connection and OSD or digital systems real Pit* VCC, GND, Video in, Video out, BEC 5V/16V, VCS/TX3, RX3 2x 6 pin connectors for serials RX1, TX1, 3.3V, VCC, 5V, GND RX3, VCS/TX3, RGB LED, VCC, 5V, GND 1x 4 pin connector for receiver Signal, TLM, 5V, GND 5 UART serials UART 1 free UART 2 used for Receiver UART 3 free UART 4 used for onboard OSD, can be set free UART 5 used for ESCs / TLM / Onewire 4 ESC solder pads (Signal/GND) in each corner Buzzer pads 4 tiny RGB LEDs (selectable color) Supported ESC protocols PWM, Oneshot125, Oneshot42, Dshot150/300/600/1200/2400, FETtec Onewire FETtec Alpha FC firmware (KISS FC firmware flashable) Updated onboard OSD Graphic OSD (STM32) Full KISS Tuning Filter (PIDs, Rates, Settings) LED control (RGB LED, Racewire) VTX Live data graphs (Voltage, motor rpm, current, motor temp, gyro values, link quality) KISS GPS support + live map Custom graphic pilot logo Stick overlay Custom layout can be deactivated for usage of digital systems Connector type: JST-SH-1mm *real Pit-Mode: A power supply pin which is remotely switchable Dimensions: Maximum outside dimensions: 37,2 x 37,2mm, without outside tips 30 x 30mm Mounting hole arrangement: 20 x 20mm with M2 mounting hole (expandable to M3) 30 x 30mm with M3 mounting hole 30 x 30mm mounting hole tips are removable to reduce overall FC size Overall height: 7,9mm Weight: 5,37g Includes:1x FETtec KISS Flight Controller G4 V1.71x 8 pin cable1x 6 pin cable1x 4 pin cable Download Manual FETtec Toolset (ESC Configurator and ALPHA Configurator)
