FHC Pivot Pin

ShowerDoorHardware.com Verified independent store

→

5 Degree "Pivot Pin Set" For Use with 3/8", 1/2" Glass East to Install All Factory Hinges Include 5 Degree Pivot Option FHC's 5 degree Pivot Pin sets are designed to allow an addit ional 5 degrees of closing for jobs that require a firmer positive position against a jamb or seal. These Pivot Pins are installed prior to installation of the hinge onto the glass.Care & Cleaning GuidelinesFor best results, keep the following recommendations in mind when caring for your FHC shower door hardware. Your shower door should be dried daily with a soft towel or cloth to ensure its original finish. Do not use harsh cleaners or chemicals on the hardware, as many of the components are coated with a clear lacquer that will become damaged beyond repair. Always test your cleaning solution in an inconspicuous area prior to cleaning the entire hardware surface. Wipe surfaces clean using a soft, dampened cloth or sponge, and rinse completely with warm water immediately after applying the cleaning solution. Use only small amounts of liquid, gentle, cleaner. Never use abrasive products, sponges, or wire scrub brushes while cleaning hardware.MaintenanceFHC's pivot pin sets come factory ready for a silent, hassle-free experience. If there is any noticeable squeaking that occurs after installation it is recommended to apply a few drops of (3 in 1) multi-purpose oil to the hinge, at the nylon washer/pivot location. The lubricant will penetrate the hinge crevices, reducing friction, cleaning grime, and/or buildup. Spray lubricants are prohibited. If, for some reason, the hinge is disassembled during maintenance, use a small amount of white lithium grease to lubricate the interior hinge components. Show more