Fiberbuilt Performance Turf Series Combo Golf Mat

My Store Verified independent store

→

Fiberbuilt Performance Turf Series Combo Golf Mat Combine Fiberbuilt's best-selling Performance Turf Tee Box with a premium putting green, and you’ll create an exceptional practice setup for your simulator, backyard, or golf academy. The Fiberbuilt Tee Box Combo Mat offers ideal conditions for every shot, from drivers (with a real tee) to irons, wedges, chips, and putts. The Performance Turf delivers realistic ball flight and a soft, stable base for all your fairway shots, constructed with 100% UV-resistant nylon fibers for durability and designed to hold a real tee. Fiberbuilt's Putting Turf features an embossed rubber backing to prevent creasing or curling, ensuring a true roll straight out of the box. Endorsed by top fitters and instructors, it runs at a 9 on the stimpmeter and receives chip shots with realistic check and roll. The modular rubber base provides a solid, shock-absorbing foundation, safe for indoor or outdoor use, and won’t shift during use. Fiberbuilt Tee Box Combo Mats are precision-cut to your specifications, stand 2" tall, and assemble effortlessly in minutes without tools. Every Tee Box Combo Mat Includes: Fiberbuilt Performance Turf Mat (10' x 4') Fiberbuilt rubber-backed putting turf with cup holes 2 metal cups Shock-absorbing, modular rubber foundation For optimum performance. you should install your Combo Mat on a firm and level surface like concrete, packed gravel, asphalt or a solid deck. It should not be installed on bare ground or grass. To order custom Combo Golf Mats with almost any size and hole placements, call 412-567-4390 and speak to one of our design consultants. Product Care Product Care Regular maintenance of your Fiberbuilt Golf Mat System will ensure maximum life for the components. Hitting Surface Panels Cleaning: Fiberbuilt Grass and Player Preferred Series hitting surfaces should be pressure washed once per year to remove any sand or dirt that has accumulated in the fibers. Maintenance: Regularly changing the ball position for hitting on the 2'x4' Player Preferred hitting panels will minimize the wear of the panels. These panels can also be rotated 180º to increase their lives. Fiberbuilt Grass panels can also be rotated 180º as wear emerges on one side. Additionally, these panels consist of 4 individual squares that can be rotated for maximum life. Below is a photo of the rotation pattern options. When the middle panel(s) need replacing, remove them from the hitting surface, bring the outside panels to the center and replace the outside panels with 2 new ones OR as shown below, when you have two hitting surfaces take the 2 end panels from the panel ‘B’ 4-pack and use them to replace the worn inner panels just removed from panel ‘A’. To rotate the panels, remove the L-channel brackets and separate the four panels that make up the driving surface. Rotate the panels so that you have a ‘new’ panel in place of where the rubber tees would be placed. Once the panels have been rotated, to re-assemble the panel components evenly and securely us a rubber hammer and “jig” to fasten the components back in place. It is important that all four components are level to recreate the smooth hitting surface. Once the four panels have been re-assembled you can attach the “L channel”. You will need to shift the ‘L channel” slightly, drill the self-taping Robertson #2 screws into the bottom of the panel. Do not reuse the same holes. Stance Mats Cleaning: The Performance Turf stance mats should be removed from the rubber foundation to be pressure washed every few months. Sand and dirt collects in the nylon fibers of the turf stance mat and will deteriorate and damage the nylon if it is not washed regularly. Maintenance: The stance mat is square to enable you to rotate the mat to balance wear. If you have rubber stance mats, sweeping and pressure washing with water will keep them clean. Never apply any cleaning or shining agents to the stance mat. Rubber Foundation Maintenance: The rubber foundation should be swept out occasionally. The frame may also be pressure washed. You will need to ensure that the drainage holes do not plug up with sand and dirt. You may also consider drilling additional holes into the rubber foundation to accelerate the water drainage.To keep your rubber foundation looking clean and new, you can apply tire cleaner (like Armor All) to the outside edges only. Ball Trays Maintenance: Ball Trays should be swept and cleaned occasionally and may also be pressure washed. To keep ball trays looking new, apply a tire cleaner (like Armor All) to the ball trays. Off-Season Storage Stack the hitting surface vertically against a wall and stack only 5-8 deep. Do NOT stack the hitting surface horizontally on top of each other; this will flatten the nylon fibers. The turf stance mats and the rubber foundations can be stacked on each other horizontally. Do not mix the stack. Parts & Assembly Information Parts & Assembly information for the Performance Turf Series Tee Box Combo Mats can be found here: 10' x 10' 10' x 12' 12' x 14' Show more