Part of our Rome Collection, the Fiore Skirt is a chic, high-waisted A-line skirt with just the right amount of flare and volume. A beginner friendly pattern with multiple variations, this elevated basic has tons of outfit potential. Available in above or below the knee lengths, the Fiore Skirt has three views. View A is a simple flared skirt with an invisible zipper at the back. View B is an asymmetrical wrap skirt with single hip pocket. View C buttons up the front with curved patch pockets. Model notes: Our model Sheenah is 5'-4" and wears a size 6. Aisha is 5'-7" and wears a size 20. All tops except for the close-fitting tshirt on Aisha are the Cielo Top from our Rome Collection. SUGGESTED FABRIC All views can be made with crisp wovens such as linen, chambray, denim, twill, poplin, lightweight canvas, and structured cottons. Please note: Views A and B can also be made with drapier fabrics like rayon challis, tencel, or silk, but the patch pocket for View C should not be sewn with fluid fabrics. YARDAGE REQUIREMENTS (45"/1.14M FABRIC) View A0-8 = 1.75yd / 1.6m, 10-14 = 2yd / 1.85m, 16-20 = 2.25 yd / 2m View B0-8 = 2.25yd / 2m, 10-14 = 2.5yd / 2.25m, 16-20 = 2.75yd/2.5m View C0-8 = 2.25yd / 2m, 10-14 = 2.5yd / 2.25m, 16-20 = 2.75yd/2.5m YARDAGE REQUIREMENTS (58"/1.5M FABRIC) View A0-20 = 1.5yd / 1.4m View B0-8 = 1.75yd / 1.6m, 10-20 = 2yd / 1.85m View C0-8 = 1.5yd / 1.4m, 10-20 = 1.75yd / 1.6m ADDITIONAL SUPPLIES Lightweight non-stretch fusible interfacing (1.25 yd / 1.1m) View A = 7” (18cm) invisible zipper View B = 2 x buttons - 1/2” - 3/4” (13-19mm) View B = scrap of 1/4” (6mm) twill tape or ribbon for loop closure (optional) View C = 6-8 buttons - 1/2” (13mm) Views B & C: Fray Stop & buttonhole chisel or seam ripper to open buttonholes Polyester thread Marking tool Sewing level: Beginner Sizes: 0 - 20 (see our sizing chart here) Finished measurements: See complete final measurements here Instructions: English
