Ensure your building meets NYC fire code with a compliant Fire Department Connection (FDC) sign. Clearly identify the location of your fire department connection to support emergency response, improve safety, and avoid violations. Durable, high-visibility signage designed for code compliance and long-term exterior use. Dimensions: 7" x 10" Materials: Printed Vinyl Mounted on to .03125in Aluminum What This Sign is For: A Fire Department Connection (FDC) sign is used to clearly identify the location of the building’s fire department connection, allowing FDNY personnel to quickly supply water to the standpipe or sprinkler system during an emergency. Proper identification is critical for rapid response and effective fire suppression. Legal Requirement Explained: The installation of FDC signage is required under the NYC Fire Code §912 and applicable NFPA standards (NFPA 13 & NFPA 14). These codes mandate that fire department connections be clearly marked to indicate their location and the systems they serve. Proper signage ensures that emergency responders can immediately identify and utilize the connection without delay. Who is Required to Post This Sign:- Buildings equipped with fire department connections (FDCs)- Properties with automatic sprinkler systems and/or standpipe systems- Commercial buildings- High-rise buildings- Multifamily residential buildings with fire protection systems- Any structure where FDNY access to a water supply connection is necessary Where We Recommend This Sign Be Posted: - Directly at or immediately above the Fire Department Connection- On the exterior of the building, facing the street or fire apparatus access point- In a location that is clearly visible and unobstructed from a distance- Adjacent to the connection so that it can be identified instantly during an emergency Unacceptable Locations to Post This Sign: - Behind gates, fences, or landscaping that obstruct visibility- Inside the building or away from the FDC- On removable or temporary surfaces- In areas blocked by parked vehicles, equipment, or storage- Mounted too high, too low, or in poorly lit locations that reduce visibility- On doors or panels that may be closed, concealing the sign Recommended Height / Installation Requirements: - Typically installed at eye level (approximately 48”–60” above finished grade)- Must be firmly mounted using permanent hardware- Constructed of durable, weather-resistant materials for exterior conditions- Lettering must be clear, legible, and high-contrast (commonly red/white)- Sized appropriately to be readable from a distance by emergency personnel Disclaimer: The information provided is for general guidance based on commonly applicable NYC Fire Code and NFPA standards. Specific requirements may vary depending on building type, occupancy classification, and site conditions. Always consult with a licensed professional or the NYC Department of Buildings (DOB) and FDNY to confirm compliance for your specific property.
