DCI Performance Fire Extinguisher mount. Laser cut from 7 GA 304 stainless steel perfect for your race car, UTV or anywhere you want to mount a Fire Extinguisher. Made in USA We have 2 versions one with a spring loaded pull pin with red pull knob and the less expensive pin locking which uses a quick release removable pin which have a spring loaded ball and a wire lanyard so you do not drop it. Mount with hose clamps, bolts or weld it on Key features Stainless steel construction so it wont rust Spring loaded quick release ball or Pin locking Vibration reducing rubber bumper Smack down tabs contour to any size tube Hose clamps included for fire extinguisher and roll bar Multiple mounting options Made in USA heavy duty construction Can be polished for show cars See below from page 23 of the Best in the Desert Rule book SCR9: FIRE EXTINGUISHER Each vehicle must carry a portable UL approved minimum 2.5-lb. ABC-class dry chemical type or equivalent Halon, AFFF Foam, Novec 1230, FE-36 fire extinguisher. Fire extinguisher must have a gauge, be fully charged, and be easily accessible from inside of the vehicle. An additional minimum 5-lb. ABC-class, dry chemical fire extinguisher or foam equivalent must be mounted on the exterior of the vehicle. The mounting must be in such a manner as to prevent damage to fire extinguisher during rollover and must be marked in such a manner as to allowing persons not familiar with vehicle to easily find fire extinguisher. On-board fire extinguishers are highly recommended. Portable and on-board fire extinguishers must have a current (less than one year old) fire marshal’s seal and attached label. Class 2000 only will be allowed a minimum of 2.5lb ABC-class, dry chemical fire extinguisher or foam equivalent mounted on the exterior of the vehicle.
Related
Related
Related
Related