Fireball pH3Acidic Shampoo Fireball’s pH3 Acidic Car Shampoo is a powerful descaling and decontaminating wash designed to refresh your vehicle’s finish and deep-clean surfaces both coated and non-coated. The specially formulated mild acidic blend works to strip mineral build-up, contaminants and residual protection layers, making it ideal for preparing paintwork for new waxes, sealants or ceramic maintenance. On vehicles with ceramic coatings, the acidic action helps unclog and descale the coating to restore performance. On non-coated vehicles, it cuts through existing wax or sealant layers to leave a clean, bare surface ready for fresh protection. pH3 can be used through a foam cannon, as a hand wash shampoo, or as a pre-wash solution. In a foam cannon, dilute it between 1:5 and 1:10 and apply an even layer across the vehicle or wheels, ensuring it remains wet before thoroughly rinsing away. For contact washing, begin with a full rinse to remove loose dirt, then dilute the shampoo between 1:600 and 1:1000 in a wash bucket. Wash the vehicle from top to bottom using a quality mitt, rinsing your mitt regularly before giving the car a final clean water rinse. When using pH3 as a pre-wash, dilute it 1:5 to 1:10, apply it to the exterior surfaces and allow it to dwell briefly—without drying—before rinsing off to remove heavy contamination or mineral build-up. Sam Says: "If you own a coated car and feel it needs a bit of a refresh, pH3 is your friend. Exceptionally good at unclogging coatings and removing light water deposits - I always recommend this as part of the maintenance routine for daily driven vehicles that are coated. If not coated it's still a great shampoo for stripping the surface and removing contamination." Warnings: This is a specialised acidic shampoo and isn’t intended for everday washing. Avoid applying in direct sunlight and never allow it to dry on the surface. Size: 500ml Bottle
