Delivery: IN STOCK. Next Day Delivery (if ordered before 14:00) Key Features: Material : Waterbased Deck Adhesive for EPDM Size: 2.5L, 5.0L, 10.0L, 20.0L Colour : White Coverage: Coverage rate needs to be between 2.5 and 3 m² per liter Application: Bonds Firestone Elevate EPDM to Timber surfaces Description: Elevate Water Based Adhesive is designed for bonding Firestone Elevate EPDM to Timber surfaces. Bonding surfaces must be clean, dry, smooth, free of sharp edges, loose and foreign materials, oil, grease and any other contaminants. The ElevateTM RubberCover Water Based Bonding Adhesive is used only for wet-mating Elevate RubberCover EPDM membranes onto acceptable wooden substrates. Application: Stir adhesive thoroughly before and during use. Use only when temperatures will not fall below freezing at anytime 24 hours after mating of EPDM. RubberCover Water Based Bonding Adhesive will be mated, while still wet, directly over plywood or OSB substrates (only types that are not treated against water absorption). Apply Water Based Bonding Adhesive at a rate of approx. 350 gr/m² over plywood or OSB with a paint roller, taking care to completely cover the plywood or OSB substrate evenly to avoid globs and puddles of adhesive. The EPDM membrane shall be mated immediately after the bonding adhesive is applied by rolling the membrane in place over the plywood or OSB. To ensure proper adhesion, compress the bonded portion of the sheet to the substrate with a stiff push broom or heavy roller. Caution: The EPDM membrane should not be exposed to any wind stresses for 48 hours after mating. Moreover, the adhesive layer cannot be subjected to freezing temperatures for a minimum of 48 hours after the mating of EPDM to the substrate. Coverage: Size: 2.5 Litres (Coverage approx 12.5m2) Size: 5.0 Litres (Coverage approx 25.0m2) Size: 10 Litres (Coverage approx 50.0m2) Downloads & Data Sheets: Product Data Sheet System Brochure
