Support where the tailstock can't reach. The Proxxon fixed steady (steady rest) for the PD 250/E mounts to the lathe bed and provides a fixed support point for long or unsupported workpieces — essential for boring operations and any situation where the tailstock is occupied or cannot be used to counter the cutting forces. Supports workpieces up to Ø 40mm. When Do You Need a Fixed Steady? A fixed steady is required in two key situations: Boring operations: When boring a through-hole or deep bore, the tailstock is often in the way or cannot provide support — the fixed steady holds the workpiece mid-span instead Long stock turning: When turning long, slender workpieces that flex or chatter under cutting pressure, a steady rest provides a third support point to eliminate deflection Key Specifications Compatible machine: Proxxon Precision Lathe PD 250/E Maximum workpiece diameter: Ø 40mm Weight: 328g Part No.: 24010 Frequently Asked Questions What's the difference between a fixed steady and a follow rest?A fixed steady mounts to the lathe bed at a fixed position and supports the workpiece at one point along its length. A follow rest mounts to the carriage and travels with the cutting tool. For boring and through-hole work, the fixed steady is the correct choice. Is this compatible with the PD 400?No — this steady is specifically designed for the PD 250/E. Check Proxxon's accessory listings for PD 400-compatible steadies. Do I need this for standard between-centers turning?Not typically — for standard turning with both chuck and tailstock engaged, a steady is not required. It becomes necessary when the tailstock must be removed or when boring operations require unobstructed access to the end of the workpiece. Works Well With Proxxon Precision Lathe PD 250/E — the host machine this steady is designed for Quick Change Tool Post for PD 250/E — pairs with the steady for efficient boring setups Proxxon 5-Piece Turning Tool Set for PD 250/E (No. 24530) — turning tools for the PD 250/E ecosystem Proxxon Tungsten Carbide Insert Cutter Set for PD 250/E (No. 24555) — carbide inserts for boring and turning Proxxon 4-Jaw Chuck with Independent Jaws for PD 250/E (No. 24036) — for holding irregular or off-center workpieces Proxxon Drill Chuck for PD 250/E — 10mm MT1 Tailstock (No. 24020) — tailstock drill chuck for boring entry holes Returns can only be accepted for unused product in its original packaging. A copy of the original packing slip or invoice is required. For warranty claims please call 1-877-776-9966. Please see our return and refund policy here. California Residents Prop 65 Information WARNING: This product can expose you to chemicals including lead, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
![[Pre-Order] - PROXXON 24080 Fixed Steady for PD 230/E](https://cdn.shopify.com/s/files/1/0504/6370/3229/products/81Xm2EjjKhL._AC_SL1500.webp?v=1665559900&width=480)
