Non-Metal and Inherent Flame Retardant quilted parka with taped seams. Wind and water resistant fabric according to EN 343. The parka is ergonomically shaped for work with raised arms. Concealed front zip and double stormflap with press studs. Detachable and adjustable hood. Two loops for communication equipment. Chest pockets with zip. D-ring. Pockets with fleece lining. Front pockets with flaps. Sleeve pocket with flap, hidden D-ring and strap for ID-pocket. Two inside pockets with zip, one for documents/Ipad with an integrated mobile phone pocket. Adjustable sleeve width and inside knitted cuffs. Drawcord at the waist and bottom of the parka. HTFR Dobby at the bottom of the jacket and on the sleeves. Heat sealed reflective stripes for greater comfort. Fiberfur lining 9128 can be attached. *The garment is tested in a 3 layer system together with basic underwear. Tranemo recommends underwear 5920/5940 and 5980. **Hood must be used or removed during welding or work with chemicals. Product Information Quality 943: Mega TX 230IR - 40% modacrylic / 59% viscose / 1% antistatic, PU-laminated, 230 g/m². Inherent Flame Retardant fabric with PU laminate. Wind and waterproof. To maintain chemical protection (EN 13034), the protective clothing must be re-impregnated after washing. 804: HTFR Dobby - 39% modacrylic / 28% polyamide / 17% cotton / 15% aramid / 1% antistatic, 295 g/m². Inherent Flame Retardant reinforcement fabric. 054: Lining - Quilt FR, 45% modacrylic / 35% cotton / 18% polyamide / 2% antistatic, 160 g/m² with polyester wadding, 80 g/m². Inherent Flame Retardant fabric with Flame Retardant polyester wadding. PFAS-free. Washing instructions Certifications The CE marking indicates that the product is type examined according to the Regulation (EU) 2016/425. EN ISO 11612 - A1 B1 C1 F1 - EN ISO 11612 - The standard specifies protective clothing to protect against heat and flame. EN 61482-2 \ APC 2 - EN 61482-2 - The standard specifies protective clothing that protects against the thermal hazard of an electric arc. ELIM: 25,0 cal/cm² ATPV: 25,0 cal/cm² EN 1149-5 - EN 1149-5 - The standard specifies protective clothing used in explosive environments (ATEX). **EN ISO 11611 - CL.1 A1 EN ISO 11611 - The standard specifies protective clothing used in welding or allied processes. **EN 13034 - type PB[6] EN 13034 - The standard specifies protective clothing that protects against liquid chemicals. EN ISO 20471 - CL.3 EN ISO 20471 - The standard specifies high visibility clothing used in trafficier environments or in other environments where extra visibility is required. Supersedes EN 471. EN 343 - 3.1 EN 343 - The standard specifies protective clothing used for working in foul weather, for example in rain, snow or fog. *EN 342 - (5118+5122) EN 342 - The standard specifies clothing that protects against cold.
