FOR NEGATIVE GROUND CARS ONLY. We've had lots of Sprites with flasher problems. For example, indicator lights often stop working, or the whole system becomes intermittent. Our best fix has been to switch to an electronic flasher unit. These babies seem to solve a lot of ills, and work much more reliably. So this is a recommended and inexpensive upgrade. The upgraded units require that you change the type of wire connectors but we make this change easy by including all the required hardware, including the self- taping screw needed to mount the bracket for your new flasher. Install tip: take a photo of your old flasher setup before removing it, this way you can reference how to wire-up your new flasher. The extra wire on the electronic flasher should go direct to ground. Install tip: To wire up the LED flasher unit, the lighter color green wires goes to center terminal (for the indicator). For the remaining two terminals, one is power, the other is switched, connect those to the side terminals. If it doesn’t work, switch the two side terminals. FOR NEGATIVE GROUND CARS ONLY.
