CUT HARD CLEAR COAT WITH EASE. Flat Top is our hard clear coat compound, built with a short cycle time that gives a very aggressive cut and an easy, dry wipe-off. Its standout feature is triple-filtered agglomerates: the abrasives are tumbled and purified three times over, so as they break down they refine the finish instead of marring it. The result is a strong cut that finishes to a near-mirror on tough European-style clears, all on a dual action. Aggressive cut on hard clear: Designed specifically for the hard clear coats that resist correction, like Mercedes and Audi. Triple-filtered agglomerates: Smooth, refined abrasive edges that polish as they diminish for a clean finish. Dry emulsion, easy wipe-off: A semi-odorless, lower-toxicity solvent and effortless removal. Pads we pair with it: A microfiber cutting pad on a dual action. Dual action machine: Built for a DA. On a rotary it flashes and dries fast, which is why we run it on a dual action. Not sure which compound or polish is right for your job? Our full guide breaks down every one, with cut and finish ratings, the pads we pair with each, and what to follow it with. 👉 Read the Compound & Polish Guide → How to Use Prime the pad with an outer and inner circle of product, worked into the pad. Spread over a 2 ft by 2 ft area. Set the dual action to speed 5. Make 2 slow passes with moderate pressure. Clean the pad, add 4 dime-size dots, and cycle the same section with no pressure for 2 passes. Wipe and follow with a polish. Detailer Tips Slow passes with moderate pressure give the most cut. Faster passes cut less. Brush out or clean the pad between sets so the cut stays even. Always follow with Classic Polish on an HDO orange foam pad to remove any light haze.
Related
Related
Related
Related