✓ Forms a gasket in place between mating metal flanges ✓ Stays flexible after cure – flexes with the flanges ✓ Seals even chipped or damaged flange faces ✓ Resists oils and solvents; eliminates the need for retorquing High Demand Item – Frequently Reordered by Contractors Solution 40 is a single-component, room-temperature-cure anaerobic flange gasketing sealant. Applied as a bead to one flange face, it cures between the mating metal flanges and fills surface voids to create a thin, resilient, vibration-proof seal that will not leak even if a flange is chipped or damaged. It cures without shrinkage, remains flexible to flex with the flanges, and resists oils and solvents through severe thermal and pressure cycling. Supplied in a 50 ml tube and a 300 ml cartridge. Applications Vacuum pump flanges Fuel and water pump housings Gearbox and cover plates Automotive and truck axle covers Close-fitting metal flanges needing a flexible, oil-resistant seal Key Features Forms a gasket in place – no precut gaskets Remains flexible after cure for flexing flanges Cures without shrinkage Seals chipped or damaged flange faces Resists oils and solvents; withstands thermal and pressure cycling Eliminates the need for retorquing Specifications Type Anaerobic flange gasketing sealant (form-in-place) Resin Methacrylate ester Form Thixotropic gel Service Temperature –65°F to +300°F Full Cure 24 hours Max Gap Fill 0.010 in (0.050 in with primer) Specific Gravity 1.10 Available Sizes 50 ml tube, 300 ml cartridge Best Used For Pump, gearbox, and cover-plate flanges Axle and housing covers Oil- and solvent-exposed joints Flanges subject to thermal and pressure cycling FAQ How is it used? Apply a bead to one clean flange face, assemble, and tighten – it cures between the flanges to form the gasket. Does it stay flexible? Yes – it remains flexible after cure so it flexes with the flanges. What gap can it fill? Up to 0.010″ (0.050″ with primer). Any restrictions? Not recommended for pure oxygen or oxidizer service, or for plastics where stress cracking could result. Why Contractors Choose This Replaces precut gaskets with a form-in-place seal Flexes with the flange and seals damaged faces Cures without shrinkage and resists oils and solvents Eliminates retorquing Case pricing that drops as the order grows ✓ Forms a flexible, vibration-proof gasket in place ✓ Resists oils and solvents to 300°F ✓ Bulk and case pricing built for shops and contractors ✓ Sold and supported by a distribution team with decades in the trade Buy More. Save More. Save 10% when you order a full case. Case and volume pricing available on every size – contact us for shop and contractor pricing on multi-case orders.
Related
Related
Related
Related