Flextex VT Variable Texture Coating Flextex VT is a variable texture coating formulated to simulate textured automotive plastics and metal. The texture can be adjusted by changing the reduction ratio. Flextex VT may be topcoated with base/clear or single-stage paint systems. VOC: 2.74 lb/gal (328 g/L) Why Choose Flextex VT? Simulates OEM textures Adjust texture size by varying reduction ratio Compatible with nearly all topcoat systems Application For best results, apply Flextex VT over a primer-surfacer sanded with 320 grit. To build texture, apply 3 to 5 light “speckle” coats allowing flash time between coats. Move gun quickly and don’t flow out the paint. Reduce fluid flow at gun for light coats. Let dry 30 minutes if light coats are applied and 2 to 3 hours for heavier applications before top coating. Flextex VT may be top coated with a lacquer-compatible topcoat system. Clean spray gun immediately after use with lacquer thinner. Texturing Reference Use a test panel for determining the texture desired. Painting with limited amounts of reducer, larger nozzle, and low air pressure at the gun will produce the coarsest texture. For finer textures, reduce the paint with the appropriate Flextex VT reducer. Heavy Texture: Spray Flextex VT mixed 8:1 (paint:reducer) using a 1.8 mm spray gun at 10-15 psi. Medium Texture: Spray Flextex VT mixed 3:1 (paint:reducer) using a 1.4 mm spray gun at 10-15 psi. Fine Texture: Spray Flextex VT mixed 1:1 (paint:reducer) using a 1.4 mm spray gun at 10-15 psi. Product Video .embed-container { position: relative; padding-bottom: 56.25%; height: 0; overflow: hidden; max-width: 100%; } .embed-container iframe, .embed-container object, .embed-container embed { position: absolute; top: 0; left: 0; width: 100%; height: 100%; } Product Resources Flextex VT SDS
