The L-Series kit is the full package. Simply pick your favorite carbon color, and select what MagSliderz. All parts, magnets, and hardware are included. The L-Series is wider than all of our other body kits. We've made brand new Wide MagSliderz, smoother, wider, and lower than ever! Ian, the team, and I wanted to bring the scale factor back to micro crawling. While this body still has a perfect approach and departure, we've limited tire size by scale, and with the wider profile, it will make lines challenging again! This kit is for a 155mm wheel base, it's designed around 58mm tires, and has some new, awesome features! Full scale interior including front seats with e-brake, shifter, cup holders, and tumbler. Rear seats that fold down for extra cargo room. Full rear tray for all of your scale goodies. New dash with glove box and steering wheel. The grill is a 2 peice, leaving room for future options. Comes with Rear Lens, and Front Lens that are designed to be used with Halo lights, 3mm ambers for the blinker, and 3mm fog lights. New addition is the separate hood cowl section, it has provisions for hood lights, and our Snorkle also gets keyed into the cowl. New foldable side mirrors, and the body has pre-set spots for you to drill out if you want to attach them! More pre-set spots are located on the inner roof for our roof rack that's coming soon! -Just in case you foresee yourself feeling skinny on the rocks, we've added a spare parts option, that includes 2 extra sets of mirrors and snorkels! MagSliderz mounting system has been completely re-worked. All 24th scale body's will use the same MagSliderz, we have 9 options: 🟢 0° Stock Chassis or any chassis that uses a stock type skid with 0° 🟢 0° Athos C1 - NWCW 🟢 5° Goblin - Hardpark and for slotted for use with Standard type Skids 🟢 5° OGRC Skid 🔴 6° EVO 24 - JEC can only be found on our FlubRC MagSliderz page 🟢 5.5° Spectr - KillrChassis 🔴 6.3° Bully - NWCW can only be found on our FlubRC MagSliderz page 🟢 11° Spectr Pro - KillrChassis 🟢 11° Athos - NWCW For gluing parts to the body, you can use a CA glue, or my favorite is Shoe Goe or e6000. The rubbery type glue helps with impacts and is also great for Magnets. CarbonFiber colors have a print quality increase, including higher temp and impact resistance. It also provides a textured matte finish, the raw prints can be painted without prep if desired. For normal paint preparation, we recommend starting with 220 Wet Sand with a flexible block, then move to 320 Wet Sand. Use a high fill sandable primer, and wet sand with 400, repeat last step until desired finish is achieved before base coat. When choosing a color and planning to paint, you have options! You can pick the same color as your paint, so scratches will be less visible!Bodies do require prep if planning to paint. For prep we reccomend starting with 220 Wet Sand with a flexible block, then move to 320 Wet Sand. Use a high fill sandable primer, and wet sand with 400, repeat last step until desired finish is achieved. ***All products are made to order. Please check the header on the main page for approximate lead times. Thank you for your support and patience - FlubRC
