Overview The ultimate Fluke laser distance meter Measures up to 100 m (330 feet) Feature-rich meter includes tilt sensor for hard-to-reach measurements, corner angle feature and compass The (100m) is the most sophisticated laser distance meter packed with versatile features to save you more time in more situations. It extends your measurement reach to 100 meters (330 feet). It offers a bigger, 4-line display, a built-in compass, and a 180º inclination sensor for leveling and height tracking. Includes Two AAA batteries Users manual on CD Quick reference guide Vinyl carrying pouch Lanyard Three-year warranty Features Measures up to 100 m (330 ft) Higher accuracy: +/-1 mm (0.04 in) 4-line display shows you even more data at a glance Inclination sensor assists with height tracking, leveling, and indirect horizontal distance measurements when line-of-sight is blocked by an obstacle Corner angle feature, allows you to determine the angle of a corner Compass provides a "heading" for your distance measurements Stores 20 complete displays for quick recall Backlight Tripod mode allows you to mount the meter to a tripod when measuring long distances Full Pythagoras function for height measurements Audible keypad feedback Stake Out feature helps you mark out defined lengths such as when constructing wooden frames Automated End-piece Correction for measuring from an edge or corner --a built-in sensor detects the position of this bracket and automatically changes the reference point Minimum/Maximum function Enhanced environmental protection:IP54-rated as dust and water spray resistant Improved battery life of 5000 measurements with auto shut-off feature Specifications Distance Measurement Typical measuring tolerance 1 ±1.0 mm 3 Maximum measuring tolerance 2 ±2.0 mm 3 Range At Leica Target Plate GZM26 100 m / 330 ft Typical range 1 80 m / 260 ft Range at unfavorable condition 4 60 m / 195 ft Smallest unit displayed 6 / 30 / 60 mm (10 / 50 / 100 m) Ø Laser point at distances 6 / 30 / 60 mm (10 / 50 / 100 m) Tilt Measurement Measuring tolerance to laser beam 5 ±0.2° Measuring tolerance to housing 5 ±0.2° Range 360° General Laser cass 2 Laser type 635 nm, < 1 mW Protection class IP54 Automatic laser off After 90 seconds Automatic power off After 180 seconds Battery life (2 x AAA) 1.5 V NEDA 24A/IEC LR03 Up to 5,000 measurements Size (L x W x D) 127 x 56 x 33 mm Weight (with batteries) 158 g Temperature range Storage operation -25°C to +70°C (-13°F to +158°F) -10°C to +50°C (14°F to +122°F) Calibration cycle Tilt and compass Maximum altitude 3000 m Maximum relative humidity 85% at 20°F to 120°F (-7°C to 50°C) Safety IEC Standard No. 61010-1:2001 EN60825-1:2007 (Class II) EMC EN 55022:2010 EN 61000-4-3:2010 EN 61000-4-8:2010 1. Applies for 100% target reflectivity (white painted wall), low background illumination, 25°C.2. Applies for 10 to 500% target reflectivity, high background illumination, -10°C to +50°C.3. Tolerances apply from 0.05 m to 10 m with a confidence level of 95%. The maximum tolerance may deteriorate to 0.1 mm/m between 10 m to 30 m and to 0.15 mm/m for distances above 30 m.4. Applies for 100% target reflectivity, background illumination between 10'000 lux and 30'000 lux.5. After user calibration. Additional angle related deviation of ±0.01° per degree up to ±45° in each quadrant. Applies at room temperature. For the whole operating temperature range the maximum deviation increases by ±0.1°. 424D, 419D and 414D Datasheet
