Overview This kit is designed to help electricians and HVAC technicians solve problems quicker. Test first for overheated electrical devices using an IR thermometer; then use electrical test tools to find out more about the problem. Features Dust and water-resistant: IP54 rated for dust and water resistance. Rugged: 3-meter (9.8-foot) drop tested. Ergonomically designed: Completely redesigned for a more natural hand fit. Small and lightweight; clips to your tool belt or belt loop or easily fits into your tool box. Features Distance to spot: Precise laser technology makes for more accurate and repeatable measurements. Dual lasers: The 62 MAX+ has dual rotating lasers to help you identify area to be measured. The measurement area is the spot between the dots. Large, backlit display: Large screen makes data easier to read, even in dark areas. Min/Max/Avg/Dif: Displays the minimum, maximum or average temperature, or the difference between two measurements. Alarm: Hi and Lo alarms for rapid display of measurements outside the limits. Power: Both the 62 MAX and 62 MAX+ are powered by a single, standard AA battery. Specifications Specifications Jaw opening 12.9 mm (0.5 in) Max wire size 1/0 THHN cable Current range AC rms 0 to 100.0 A Accuracy AC current (50/60 Hz) 3% ± 3 counts AC Response Averaging Voltage range AC 0 to 600 V Accuracy AC voltage 1.5% ± 2 counts Voltage range DC 0 to 600 V Accuracy DC voltage 1% ± 1 count Resistance range 0 to 1000 Ω Continuity beeper threshold On at < 25 Ω, off at > 400 Ω Volts indicator LED threshold Guaranteed on by 30 V AC Environmental Specifications Operating temperature -10°C to 50°C Storage temperature -30°C to 60°C Humidity (without condensation) 0% to 95% (5°C to 30°C); 0% to 75% (30°C to 40°C);0% to 45% (40°C to 50°C) Dust/water resistance Yes Operating altitude 2000 meters max Temperature coefficient 0.1 x (specified accuracy)/°C (< 18°C or > 28°C) Safety Specifications Measurement Category IEC 61010-2-032, IEC61010-2-033: CAT III 600 V, 100 A ac Agency approvals CSA, TUV Maximum voltage 600 V between any terminal and earth ground Mechanical and General Specifications Size 30.5 x 51 x 203 mm Weight 300 g Warranty Two-years Battery life 200 hour zinc chloride, 400 hour alkaline Battery type 2 x AA Low battery indicator Yes Current sensor opening 12.9 mm Calibration cycle 1 year Test leads Type Heavy duty, flexible leads rated for 1000 V use.Field replaceable leads terminate in male shrouded banana plugs Probes One red, one black.Detachable Slim-Reach™ probe tips Styles TP1 Slim Reach™ test brobes Safety Specifications Safety CAT IV 600 V, CAT III, 1000 V Maximum voltage 1000 V AC rms from earth to ground, in compliance with EN61010 Fluke 62 MAX+ Infrared Thermometer Specifications Temperature range -30°C to 650°C (-22°F to 1202°F) Accuracy ±1.0°C or ±1.0% of reading, whichever is greater-10°C to 0°C: ±2.0-30°C to -10°C: ±3.0 Response time (95%) < 300 ms (95% of reading) Spectral response 8 to 14 microns Emissivity 0.10 to 1.00 Optical resolution 12:1 (calculated at 90% energy) Display resolution 0.1°C (0.2°F) Repeatability of readings ±0.5% of reading or < ±0.5°C (1°F), whichever is greater Power AA battery Battery life 8 hours with laser and backlight on Physical Specifications Weight 255 g (8.99 oz) Size 175 x 85 x 75 mm (6.88 x 3.34 x 2.95 in) Operating temperature 0°C to 50°C (32°F to 122°F) Storage temperature -20°C to 60°C (-4°F to 140°F), (without battery) Operating humidity 10% to 90% RH non-condensing at 30°C (86°F) Operating altitude 2000 meters above mean sea level Storage altitude 12,000 meters above mean sea level IP rating IP 54 per IEC 60529 Drop test 3 meters Vibration and shock IEC 68-2-6 2.5 g, 10 to 200 Hz, IEC 68-2-27, 50 g, 11 ms EMC EN 61326-1:2006 EN 61326-2:2006 Standards and agency approval Compliance EN/IEC 61010-1: 2001 Laser safety FDA and EN 60825-1 Class II
