Fluke 754 Documenting Process Calibrator-HART

Mektronics Australia Verified independent store

→

Overview The is everything you needed and wished for in the 744 and more! HART communication capability is combined to deliver an integrated communicating calibrator. This rugged, reliable tool is ideal for calibrating, maintaining, and troubleshooting HART and other instrumentation. The does the work of several tools - sourcing, simulating and measuring pressure, temperature, and electrical signals in one rugged, hand-held device. You’ll fall in love with the new improved graphical screen, Li-on battery for longer life, USB port and new accessories to complete the package. For documentation, the automates calibration procedures and captures your data. And, of course, it helps you meet rigorous standards like ISO 9000, FDA, EPA and OSHA regulations. Supports popular instrumentation management software. The 753 and 754, 743 and 744 work with the Fluke DPC/TRACK2™ software, and with popular programs from Honeywell Meridium, Emerson, Cornerstone, Yokogawa, Prime Technologies, Intergraph and others. It allows you to create procedures, instructions, and action lists to deliver fast, easy documentation. Features The is a power multifunction documenting calibrator that lets you download procedures, lists, and instructions created with software-or upload data for printing, archiving, and analysis. The also features a powerful built in HART® interface capable of performing nearly all the day-to-day tasks you now perform with a separate communicator. Measure volts, mA, RTDs, thermocouples, frequency, and ohms to test sensors, transmitters and other instruments Source/simulate volts, mA, thermocouples, RTDs, frequency, ohms, and pressure to calibrate transmitters Power transmitters during test using loop supply with simultaneous mA measurement Measure/source pressure using any of 29 Fluke 700Pxx Pressure Modules Create and run automated as-found/as-left procedures to satisfy quality programs or regulations. Record and document results Holds up to a full week of downloaded procedures and calibration results. Use many features like autostep, custom units, user entered values during test, one-point and two-point switch testing, square root DP flow testing, programmable measurement delay etc. Easy to use Three year warranty Bright white dual display. Read both sourced and measured parameters simultaneously. Multi lingual interface Rechargeable Li-Ion battery for 10 hour uninterrupted use. Includes gas gauge. Handling of fast pulsed RTD transmitters and PLCs, with pulses as short as 1 ms. Delivered with DPC/Track Sample software. Compatible with many Asset Management software packages. Includes BC7240 battery charger Li-on BP7240 battery pack DPCTrack 2™ Sample Software Instruction manual NIST-traceable calibration report and data Three sets of TP220 test probes with three sets of “extended tooth alligator clips Two sets AC280 hook clips C799 Soft Field Case USB communication cable, Fluke 754HHC HART communications cable Specifications Measurement Accuracy Voltage DC Range/ Resolution 1 Year 2 Years 100.000 mV 0.02% + 0.005 mV 0.03% + 0.005 mV 3.00000 V 0.02% + 0.00005 V 0.03% + 0.00005 V 30.0000 V 0.02% + 0.0005 V 0.03% + 0.0005 V 300.00 V 0.05% + 0.05 V 0.07% + 0.05 V Voltage AC 3.000 V (40 Hz to 500 Hz) / 0.001 V 0.5% + 0.002 V 1.0% + 0.004 V 30.00 V (40 Hz to 500 Hz) / 0.01 V 0.5% + 0.02 V 1.0% + 0.04 V 300.0 V (40 Hz to 500 Hz) / 0.1 V 0.5% + 0.2 V 1.0% + 0.2 V Current DC 30.000 mA 0.01% + 5 uA 0.015% + 7 uA 110.00 mA 0.01% + 20 uA 0.015% + 30 uA Resistance 10.000 Ω 0.05% + 50 mΩ 0.07% + 70 mΩ 100.00 Ω 0.05% + 50 mΩ 0.07% + 70 mΩ 1.0000 kΩ 0.05% + 500 mΩ 0.07% + 0.5 Ω 10.000 kΩ 0.1% + 10 Ω 0.15% + 15 Ω Frequency 1.00 to 110.00 Hz / 0.01 Hz 0.05 Hz 110.1 to 1100.0 Hz / 0.1 Hz 0.5 Hz 1.101 to 11.000 kHz / 0.001 kHz 0.005 kHz 11.01 to 50.00 kHz / 0.01 kHz 0.05 kHz Source Accuracy 1 Year 2 Years Voltage DC 100.000 mV 0.01% + 0.005 mV 0.015% + 0.005 mV 1.00000 V 0.01% + 0.00005 V 0.015% + 0.0005 V 15.0000 V 0.01% + 0.0005 V 0.015% + 0.0005 V Current DC 22.000 mA (source) 0.01% + 0.003 mA 0.02% + 0.003 mA Current sink (simulate) 0.02% + 0.007 mA 0.04% + 0.007 mA Resistance 10.000 Ω 0.01% + 10 mΩ 0.015% + 15 mΩ 100.00 Ω 0.01% + 20 mΩ 0.015% + 30 mΩ 1.0000 kΩ 0.02% + 0.2 Ω 0.03% + 0.3 Ω 10.000 kΩ 0.02% + 3 Ω 0.03% + 5 Ω Frequency 0.1 to 10.99 Hz 0.01 Hz 0.01 to 10.99 Hz 0.01 Hz 11.00 to 109.99 Hz 0.1 Hz 110.0 to 1099.9 Hz 0.1 Hz 1.100 to 21.999 kHz 0.002 kHz 22.000 to 50.000 kHz 0.005 kHz Technical Data Data log functions Measure functions Voltage, current, resistance, frequency, temperature, pressure Reading rate 1, 2, 5, 10, 20, 30, or 60 readings/minute Maximum record length 8000 readings (7980 for 30 or 60 readings/minute) Ramp functions Source functions Voltage, current, resistance, frequency, temperature Rate 4 steps/second Trip detect Continuity or voltage (continuity detection not available when sourcing current) Loop power function Voltage Selectable, 26 V Accuracy 10%, 18 V minimum at 22 mA Maximum current 25 mA, short circuit protected Maximum input voltage 50 V DC Step functions Source functions Voltage, current, resistance, frequency, temperature Manual step Selectable step, change with arrow buttons Autostep Fully programmable for function, start delay, stepvalue, time per step, repeat Environmental Specifications Operating temperature -10°C to +50°C Storage temperature -20°C to +60°C Dust/water resistance Meets IP52, IEC 529 Operating altitude 3000 m above mean sea level (9842 ft) Safety Specifications Agency approvals CAN/CSA C22.2 No 1010.1-92, ASNI/ISA S82.01-1994, UL3111, and EN610-1:1993 Mechanical and General Specifications Size 136 x 245 x 63 mm (5.4 x 9.6 x 2.5 in) Weight 1.2 kg (2.7 lb) Batteries Internal Battery Pack Li-ion: 7.2V,4400mAh, 30 Wh Battery life >8 hours typical Battery replacement Replace without opening calibrator; no tools required Side port connections Pressure module connector USB Connector to interface to your PC Digital instrument (HART) connector Connection for optional battery charger/eliminator Data storage capacity 1 week of calibration procedures results 90 day specifications The standard specification interval for the 750 Seriesare 1 and 2 years. Typical 90 day measurement and source accuracy can be estimated by dividing the one year "% of reading" or "% of output" specifications by 2. Floor specifications, expressed as "% of full scale" or "counts" or "ohms" remain constant. Temperature, Resistance Temperature Detectors Degrees or % of reading - Type (α) Range °C Measure °C1 1 year 2 year 100 Ω Pt (385) -200 to 100100 to 800 0.07°C0.02% + 0.05°C 0.14°C0.04% + 0.10°C 200 Ω Pt (385) -200 to 100100 to 630 0.07°C0.02% + 0.05°C 0.14°C0.04% + 0.10°C 500 Ω Pt (385) -200 to 100100 to 630 0.07°C0.02% + 0.05°C 0.14°C0.04% + 0.10°C 1000 Ω Pt (385) -200 to 100100 to 630 0.07°C0.02% + 0.05°C 0.14°C0.04% + 0.10°C 100 Ω Pt (3916) -200 to 100100 to 630 0.07°C0.02% + 0.05°C 0.14°C0.04% + 0.10°C 100 Ω Pt (3926) -200 to 100100 to 630 0.08°C0.02% + 0.06°C 0.16°C0.04% + 0.12°C 10 Ω Cu (427) -100 to 260 0.2°C 0.4°C 120 Ω Ni (672) -80 to 260 0.1°C 0.2°C Source current Source °C Allowable current2 1 year 2 year 1 mA 0.05°C0.0125% + 0.04°C 0.10°C0.025% + 0.08°C 0.1 mA to 10 mA 500 μA 0.06°C0.017% + 0.05°C 0.12°C0.034% + 0.10°C 0.1 mA to 1 mA 250 μA 0.06°C0.017% + 0.05°C 0.12°C0.034% + 0.10°C 0.1 mA to 1 mA 150 μA 0.06 C0.017% + 0.05°C 0.12 C0.034% + 0.10°C 0.1 mA to 1 mA 1 mA 0.05°C0.0125% + 0.04°C 0.10°C0.025% + 0.08°C 0.1 mA to 10 mA 1 mA 0.05°C0.0125% + 0.04°C 0.10°C0.025% + 0.08°C 0.1 mA to 10 mA 3 mA 0.2°C 0.4°C 0.1 mA to 10 mA 1 mA 0.04°C 0.08°C 0.1 mA to 10 mA 1. For two and three-wire RTD measurements, add 0.4°C to the specifications.2. Supports pulsed transmitters and PLCs with pulse times as short as 1 ms Temperature, Thermocouples Type Source °C Measure °C Source °C 1 year 2 years 1 year 2 years E -250 to -200 1.3 2.0 0.6 0.9 -200 to -100 0.5 0.8 0.3 0.4 -100 to 600 0.3 0.4 0.3 0.4 600 to 1000 0.4 0.6 0.2 0.3 N -200 to -100 1.0 1.5 0.6 0.9 -100 to 900 0.5 0.8 0.5 0.8 900 to 1300 0.6 0.9 0.3 0.4 J -210 to -100 0.6 0.9 0.3 0.4 -100 to 800 0.3 0.4 0.2 0.3 800 to 1200 0.5 0.8 0.3 0.3 K -200 to -100 0.7 1.0 0.4 0.6 -100 to 400 0.3 0.4 0.3 0.4 400 to 1200 0.5 0.8 0.3 0.4 1200 to 1372 0.7 1.0 0.3 0.4 T -250 to -200 1.7 2.5 0.9 1.4 -200 to 0 0.6 0.9 0.4 0.6 0 to 400 0.3 0.4 0.3 0.4 B 600 to 800 1.3 2.0 1.0 1.5 800 to 1000 1.0 1.5 0.8 1.2 1000 to 1820 0.9 1.3 0.8 1.2 R -20 to 0 2.3 2.8 1.2 1.8 0 to 100 1.5 2.2 1.1 1.7 100 to 1767 1.0 1.5 0.9 1.4 S -20 to 0 2.3 2.8 1.2 1.8 0 to 200 1.5 2.1 1.1 1.7 200 to 1400 0.9 1.4 0.9 1.4 1400 to 1767 1.1 1.7 1.0 1.5 C 0 to 800 0.6 0.9 0.6 0.9 800 to 1200 0.8 1.2 0.7 1.0 1200 to 1800 1.1 1.6 0.9 1.4 1800 to 2316 2.0 3.0 1.3 2.0 L -200 to -100 0.6 0.9 0.3 0.4 -100 to 800 0.3 0.4 0.2 0.3 800 to 900 0.5 0.8 0.2 0.3 U -200 to 0 0.6 0.9 0.4 0.6 0 to 600 0.3 0.4 0.3 0.4 BP 0 to 1000 1.0 1.5 0.4 0.6 1000 to 2000 1.6 2.4 0.6 0.9 2000 to 2500 2.0 3.0 0.8 1.2 XK -200 to 300 0.2 0.3 0.2 0.5 300 to 800 0.4 0.6 0.3 0.6 Show more