Overview The 80I-110s is compatible with any Fluke ScopeMeter Test Tool, Power Harmonics Analyzer, Oscilloscope, Multimeter, or other voltage measurement device that has the following features: BNC input connectors or if using a meter convert the banana plugs to a BNC connector using the adapter PM9081/001. Features Current Range: 0.1 to 100A DC or 0.1 to 70A AC Basic Accuracy (DC to 1kHz):100mV/A setting: 50mA to 10A +/- 3% of reading + 50mA10mV/A setting: 50mA to 40A +/- 4% of reading + 50mA40A to 80A +/- 12% of reading + 50mA80 to 100A +/- 15% of reading Output Signal: 10A range: 100mV/A | 100A range: 10mV/A Bandwidth: 1Hz to 20kHz Working Voltage: 600V AC rms Maximum Conductor Size: 11.8 mm (.46 inch) diameter Safety Rating: IEC 1010 and CSA-C22.2 No. 1010-1 Installation Category II, Working Voltage 600V Specifications Specifications Nominal current range 10 A, AC/DC 100 A, AC/DC Continuous current range 0.1 A - 10 A AC/DC 1 A - 100 A AC/DC Maximum non-destructive current 140 A - 2 kHz Lowest measurable current 0.1 A Basic accuracy 100 mV/A setting: 50 mA to 10 A ±3% of reading +50 mA 10 mV/A setting: 50 mA to 40 A ±4% of reading +50 mA 40 A to 80 A ±12% of reading +50 mA 80 to 100 A ±15% of reading Useable frequency DC - 100 kHz Output level(s) 10 A range: 100 mV/A 100 A range: 10 mV/A Zero error adjustment Yes Safety Specifications Safety CAT II, 600 V CAT III, 300 V Maximum voltage 600 V Mechanical and General Specifications Warranty 1 year Battery life 9 V, 55 h Maximum conductor diameter 11.8 mm Output cable length 1.6 m BNC adapter Yes
