[shortdesc] Professional AC/DC current clamp with Hall-effect sensor. Measures DC current up to 1000A and AC up to 600A. CAT III 600V safety rated with 1 mV/A output.[/shortdesc] [properties] Model Fluke i1010 Product Type AC/DC Current Clamp Measurement Type Hall sensor AC Current Range 1 A to 600 A DC Current Range 1 A to 1000 A Output Level 1 mV/A Frequency Range DC to 10 kHz Safety Rating CAT III 600 V Maximum Conductor Diameter 30 mm Battery Life 9 V, 60 hours [/properties] [specifications] Nominal Current Range 600 A AC; 1000 A DC Continuous Current Range 1 A to 600 A AC; 1 A to 1000 A DC Maximum Non-destructive Current 1000 A Lowest Measurable Current 0.5 A Basic Accuracy 2% + 0.5 A (% reading + floorspec) Usable Frequency DC to 10 kHz Output Sensitivity 1 mV/A Zero Adjustment Yes Safety Category CAT III 600 V Maximum Voltage 600 V Maximum Conductor Diameter 30 mm; 2 x 25 mm Output Cable Length 1.6 m Connector Type Shrouded banana plugs [/specifications] Measure High Currents Safely Without Breaking the Circuit The Fluke i1010 AC/DC Current Clamp is designed for professionals who need precise, non-intrusive current measurements in demanding environments. Built with Hall-effect technology, this clamp extends the capabilities of Fluke multimeters, enabling accurate AC and DC current readings up to 1000A without interrupting the circuit. Its robust design and wide measurement range make it an essential diagnostic tool for electrical maintenance and troubleshooting. Key Benefits & Features Wide Current Measurement Range: Measures from 1A up to 1000A DC and 600A AC, making it suitable for both low and high current applications across industrial systems. Hall-Effect Sensor Technology: Ensures accurate AC and DC readings with a stable 1 mV/A output for precise analysis and diagnostics. Non-Intrusive Testing: Allows current measurement without breaking the circuit, improving safety and minimizing downtime during maintenance. Broad Compatibility: Works seamlessly with most Fluke digital multimeters, extending their measurement capabilities. Large Jaw Design: Accommodates conductors up to 30 mm diameter, enabling access to cables in tight or hard-to-reach areas. Ideal Use Cases Electrical maintenance and troubleshooting in industrial facilities Power distribution system diagnostics HVAC system current monitoring Field service testing with Fluke multimeters Inspection of high-current circuits without system shutdown Technical Specifications Measurement Type: Hall sensor AC Current Range: 1A to 600A DC Current Range: 1A to 1000A Maximum Current: 1000A non-destructive Accuracy: 2% + 0.5 A Frequency Range: DC to 10 kHz Output Signal: 1 mV/A Safety Rating: CAT III 600V Maximum Conductor Diameter: 30 mm Output Cable Length: 1.6 m Upgrade Your Electrical Testing Precision Today Enhance your measurement capabilities with the Fluke i1010 current clamp. Order today for reliable, high-accuracy current diagnostics.
