Overview The i6000sflex is an AC current probe utilising the Rogowski principle. It can be used to measure currents up to 6000A when used in conjunction with oscilloscopes, recorders or data loggers. The flexible and lightweight measuring head allows quick and easy installation in hard to reach areas. Specifications Electrical Characteristics Current ranges 60 A / 600 A / 6000 A AC rms Output sensitivity (AC coupled) 50 mV /5 mV / 0.5 mV per A Load impedance 100 kOhm minimum Accuracy (at +25°C) ±1% of range (45 – 65 Hz) Linearity (10% to 100% of range) ±0.2% of reading Noise 8 mV AC rms (60 A) 2 mV AC rms (600/6000 A) Frequency range 10 Hz to 50 kHz (-3 dB) Phase error < ±1° (45 – 65 Hz) ±10° (at 20 kHz) Position sensitivity (with cable > 25 mm from the coupling) ±2% of range External field (with cable > 200 mm from the head) ±1% of range Power supply 2 x AA MN 1500 LR6 alkaline 400 Hours, low battery indicator or dedicated ext power supply Temperature coefficient ±0.08% of reading per ° C Working voltage (see Safety Standards section) 600 V AC rms or DC General Characteristics Head cable length (double insulated) 610 mm (24 in) I6000s Flex-24 915 mm (36 in) I6000s Flex-36 Head cable diameter 14.3 mm Head bend radius 38.1 mm Cable length (head to electronics) 2 m Output connection 0.5 m cable terminated with safety BNC connector Supplied with 4 mm safety plug adaptor Operating temperature range -20 to +90°C (head) -20 to +85°C (electronics) Storage temperature range -40 to +105°C (head) -20 to +85°C (electronics) Operating humidity 15% to 85% (non condensing) Weight 180 g (head), 190 g (electronics) Safety Standards BS EN 61010 1: 2001 BS EN 61010 2-032: 2002 BS EN 61010 031: 2002 600 V rms, Category III, Pollution degree 2 EMC standards BS EN 61326: 1998 +A1, A2, and A3 Use of the probe on uninsulated conductors is limited to 600 V AC rms or DC and frequencies below 1 kHz Electrical Characteristics Current ranges 60 A / 600 A / 6000 A AC rms Output sensitivity (AC coupled) 50 mV /5 mV / 0.5 mV per A Load impedance 100 kOhm minimum Accuracy (at +25°C) ±1% of range (45 – 65 Hz) Linearity (10% to 100% of range) ±0.2% of reading Noise 8 mV AC rms (60 A) 2 mV AC rms (600/6000 A) Frequency range 10 Hz to 50 kHz (-3 dB) Phase error < ±1° (45 – 65 Hz) ±10° (at 20 kHz) Position sensitivity (with cable > 25 mm from the coupling) ±2% of range External field (with cable > 200 mm from the head) ±1% of range Power supply 2 x AA MN 1500 LR6 alkaline 400 Hours, low battery indicator or dedicated ext power supply Temperature coefficient ±0.08% of reading per ° C Working voltage (see Safety Standards section) 600 V AC rms or DC General Characteristics Head cable length (double insulated) 610 mm (24 in) I6000s Flex-24 915 mm (36 in) I6000s Flex-36 Head cable diameter 14.3 mm Head bend radius 38.1 mm Cable length (head to electronics) 2 m Output connection 0.5 m cable terminated with safety BNC connector Supplied with 4 mm safety plug adaptor Operating temperature range -20 to +90°C (head) -20 to +85°C (electronics) Storage temperature range -40 to +105°C (head) -20 to +85°C (electronics) Operating humidity 15% to 85% (non condensing) Weight 180 g (head), 190 g (electronics) Safety Standards BS EN 61010 1: 2001 BS EN 61010 2-032: 2002 BS EN 61010 031: 2002 600 V rms, Category III, Pollution degree 2 EMC standards BS EN 61326: 1998 +A1, A2, and A3 Use of the probe on uninsulated conductors is limited to 600 V AC rms or DC and frequencies below 1 kHz Includes Fluke-i6000s Flex AC Current Probe
