Description: Quickly and easily connected to most canister filter setups, the UVC In-Line Clarifier eliminates suspended bacteria and algae for a clear and healthy aquarium. Ideal to use in conjunction with the Fluval 306, 307, 406 and 407 series filters. A chemical-free and maintenance-free way to purify water Eradicates suspended bacteria and algae in the water column that contribute to cloudy and green water, respectively Helps prevent the growth of cyanobacteria that often smothers and destroys aquatic plants Does not harm beneficial, surface-dwelling bacteria Condensed design redirects water flow up, down and around the bulb to maximize contact time for effective clarification CCFL (Cold Cathode Fluorescent Light) technology runs cooler than traditional UVC bulbs to last up to 30,000 hours (3X longer) Easily fits within aquarium cabinetry without cluttering existing filtration setup Quickly connects in-line to all canister filter hosing with an internal diameter of 5/8” (or 16mm), including all Fluval 07 and 06 Series filters Multi-directional – works in either direction so there is no need to move existing filter setup Energy-efficient – up to 80% less expensive to operate than competitive clarifiers 4–24 hour timer included for optional intermittent use Hose connector and mounting hardware included – no additional parts required For use in freshwater, saltwater and even turtle aquariums where algae is often present Vid: Included: 3W UVC In-Line Clarifier unit 18.5″ / 47 cm Ribbed hosing 4-24 Hour timer 100-240V / 24V Power supply 2 Mounting screws Specifications Code of distributor: PF165 Barcode: 015561102032 Weight: 1Kg Warranty: 2 year warranty Dimensions: 16 x 13 x 6.6 cm Max. flow: 930lph Power consumption: 3w Fittings: hose size - 16 mm hose Max operating pressure: 0.5 Bar Tank recommendation: 400l Warranty: 2 YEAR STANDARD WARRANTY The Fluval UVC in-line Clarifier is guaranteed for defective parts and workmanship for a period of 2 years from the date of purchase. This guarantee is valid with proof of purchase only. The guarantee is limited to repair or replacement only and does not cover consequential loss, loss or damage to livestock and personal property or damage to animate or objects, irrespective of the cause thereof. This guarantee is valid only under normal operating conditions for which the unit is intended. It excludes any damage caused by unreasonable use, negligence, improper installation, tampering, abuse or commercial use. The warranty does not cover wear and tear, breakage of glass or parts which have not been adequately or correctly maintained. THIS DOES NOT AFFECT YOUR STATUTORY RIGHTS. Install: The UVC unit is compatible with Fluval 06 and 07 series canister filters, in addition to those with output hose inner diameter of 5/8” (16 mm) and an outer hose diameter of 1/8” (19 mm). 1. Insert ribbed hosing supplied with your UVC unit into the output nozzle of your canister filter and tighten nut. 2. Connect other end of UVC supplied hosing into one side of UVC unit and tighten nut. NOTE: The UVC unit is multidirectional and will operate in either direction. 3. Connect filter output hosing to the opposite (unused) UVC nozzle and tighten nut. 4. To ensure maximum flow, DO NOT install UVC unit above the aquarium water line. To make sure the output hose reaches the aquarium with no kinks or loops, trial mount the UVC unit and hose before making any final cuts or holes. NOTE: The UVC unit is supplied with (2) mounting screws for easy installation. 5. Attach filter output and intake assembly to aquarium (Refer to filter manual for proper installation). 6. Prime your canister filter. 7. Plug in your canister filter to electrical outlet and ensure that water is flowing in and out of the canister filter. 8. Plug in the UVC unit to electrical outlet.
