PRODUCT OVERVIEWThe ARRIS TM602A is an advanced E-MTA (Embedded Multimedia Terminal Adapter) that complies with DOCSIS® 2.0 and EuroDOCSIS 2.0 standards. This model supports two lines of carrier-grade Voice over IP (VoIP), High-Speed Data access, and IPv6, making it a robust solution for modern telecommunication needs. Note that the TM602A is not available for retail purchase; availability should be confirmed with service providers.PRODUCT TYPE / CATEGORYNetworkingNetworking AccessoriesKEY FEATURES• Compatibility : Backwards compatible with DOCSIS 1.0, 1.1, and 2.0.• Compliance : DOCSIS® 2.0 and PacketCable™ 1.1/1.5 compliant design.• Connectivity : High-speed internet via 10/100 Base-T Ethernet (RJ-45) or USB 1.1 port.• VoIP Support : Supports up to two lines of carrier-grade VoIP.• Protocol Support : Multiple protocol support including PacketCable (NCS) and Session Initiation Protocol (SIP).• Diagnostics : Loop diagnostics for remote testing and troubleshooting of in-house wiring.• Enhanced Line Card : Improved performance over the TM502, with over 20% increase in high loop current mode and 10% greater ringing voltage.• Future Proofing : 1GHz tuner for compatibility with future plant upgrades.• Codec Support : Supports toll grade, compression, and high fidelity codecs (high fidelity support available with future firmware upgrades).• Battery Options : Includes 2-cell Li-Ion for up to 8-hour standby and 8-cell battery pack for up to 24-hour standby.• Configurable Battery Management : Firmware allows customization of operation parameters.• Boot from Battery : Can boot the modem from a charged battery without needing AC power.• Interfaces: RF Interface : External F-connector• Data Interfaces : 10/100 Base-T Ethernet (RJ-45), USB 1.1 Series B• Telephony Interface : 2 lines; RJ-14 (“Line 1/2”), RJ-11 (“Line 2”)• Input Voltage : 100-240 VAC 50/60 Hz• Telephony: Supervisory Voltage : 48 VDC nominal• Maximum Loop Length : 1000 ft (457M) of 26 AWG (0.4 mm) wireTECHNICAL SPECIFICATIONS• Brand: EhubAmerica• Model: TM602A• Product Type: Networking Accessories• Compatibility : Backwards compatible with DOCSIS 1.0, 1.1, and 2.0.• Compliance : DOCSIS® 2.0 and PacketCable™ 1.1/1.5 compliant design.• Connectivity : High-speed internet via 10/100 Base-T Ethernet (RJ-45) or USB 1.1 port.• VoIP Support : Supports up to two lines of carrier-grade VoIP.• Protocol Support : Multiple protocol support including PacketCable (NCS) and Session Initiation Protocol (SIP).• Diagnostics : Loop diagnostics for remote testing and troubleshooting of in-house wiring.• Enhanced Line Card : Improved performance over the TM502, with over 20% increase in high loop current mode and 10% greater ringing voltage.• Future Proofing : 1GHz tuner for compatibility with future plant upgrades.• Codec Support : Supports toll grade, compression, and high fidelity codecs (high fidelity support available with future firmware upgrades).• Battery Options : Includes 2-cell Li-Ion for up to 8-hour standby and 8-cell battery pack for up to 24-hour standby.• Configurable Battery Management : Firmware allows customization of operation parameters.• Boot from Battery : Can boot the modem from a charged battery without needing AC power.• Interfaces: RF Interface : External F-connector• Data Interfaces : 10/100 Base-T Ethernet (RJ-45), USB 1.1 Series B• Telephony Interface : 2 lines; RJ-14 (“Line 1/2”), RJ-11 (“Line 2”)• Input Voltage : 100-240 VAC 50/60 Hz• Telephony: Supervisory Voltage : 48 VDC nominal• Maximum Loop Length : 1000 ft (457M) of 26 AWG (0.4 mm) wire• Ringing Load Capacity : 10 REN total; 5 per line• High Loop Current Mode : 40mA constant current source (NA templates only)• Telcordia™ GR 1089 Tested : Lightning and power surge compliant• Programmable Interface : Supports multiple country templates• RF Downstream: Frequency Range : 88-1002 MHz• Modulation : 64 or 256 QAM• Data Rate : Up to 30 or 42 Mbps• RF Input Sensitivity Level : -15 to 15 dBmV• Bandwidth : 6 MHz• RF Upstream: Frequency Range : 5-42 MHz• Modulation : QPSK, 8-QAM, 16-QAM, 32-QAM, 64-QAM & 128-QAM (S-CDMA only)INTENDED USE / APPLICATIONS• Professional networking and communications deployments• Commercial, institutional, or industrial installations• Use with compatible equipment according to manufacturer specifications
