Handle Foam Grip

Luggageworks Verified independent store

→

INSTALLATION OF FOAM GRIP Includes: - Foam grip Tools you will need: - Phillips screwdriver - Small nail and hammer (for stainless-steel handles only) - Lubricant product Instructi ons: Step 1 - Must take the handle out of the bag. If not, it may damage the rods of the sliding handles. Step 2 - Remove the 4 screws on the rings at the top of the bag. Step 3 - Squeeze the triggers together as you pull the handle out of the bags. NOTE: for the ALUMINUM HANDLE there is a screw under foam. Remove the screw so that the rod will release from the coupler. NOTE: for the STAINLESS-STEEL HANDLE there is a pin under the foam. Take a small nail to drive the pin out to allow the rod to release from the coupler. Step 5 - Pull the old foam off and install the new foam. You may need to lubricate the coupler so that the foam grip will slide on easily for you. Step 6 - Reinstall the rod/screw or rod/pin to the coupler. Step 7 - Squeeze the triggers together and reinstall the sliding handle back into the bag. Step 8 - Put the 4 screws back into the rings. For questions regarding our replacement parts, please contact our Customer Service Department at 800-722-1793, Monday through Friday, between 8:00 a.m. and 5:00 p.m. CT. Show more