Autoprint official high-quality replacement logo was designed for Ford Focus MK4. Perfect fit The acrylic design and official 3M Adhesive backing allows a quick and simple installation of the logo as it matches the exact measurements and curves of the original from the vehicle. Features Designed by Autoprint Exact dimensions of the original Made in the UK Specification Material: Gloss acrylic Fitment 3M Adhesive backing Installation Please do not attempt to apply in cold conditions (less than 10°C) as this can affect the adhesive. Before applying, clean the surface area with an alcohol-based cleaner (tar & glue remover or similar) and allow to dry. We recommend using masking tape to mark the area before attempting to fit. Once the surface is clean and dry gently heat the badge and the surface it is to be applied to using a hair dryer or heat gun (take care using a heat gun if near painted surfaces). This will aid the adhesive process. Align the logo in the correct position and apply pressure for a minimum of 30 seconds. Do not pressure wash for at least 24 hours. What's in the box 1x Replacement logo
