Description The Focus is a single surface-mounted spotlight with a cylindrical matt black aluminium head mounted on a 60mm diameter ceiling plate. The spotlight head swivels through approximately 350 degrees horizontally and tilts 90 degrees vertically from the mounting joint, allowing the GU10 bulb beam to be directed at artwork, worktops, displays or architectural features from a fixed ceiling position. Designed for surface mounting directly onto plasterboard, concrete or timber ceilings where recessed downlights are impractical, the Focus suits kitchens needing task light over worktops, home offices, retail displays, galleries and hospitality settings where directed accent lighting is required. The 130mm projection from ceiling to head end means the fitting works in rooms with ceiling heights from 2.4m upwards without the spotlight head sitting too low into the visual field. The matt black aluminium construction gives a low-sheen finish that minimises reflections under daylight and pairs cleanly with industrial, modern and minimalist interiors. The GU10 socket accepts any standard mains-voltage LED, halogen or CFL bulb up to 10W (sold separately), giving control over beam angle, colour temperature and brightness depending on the specific bulb chosen. The IP20 rating limits use to dry indoor environments only. Specification Height 19.5cm Length 13cm Diameter 6cm Finish Black Construction Aluminium IP Rating IP20 Voltage AC 220-240 Bulb Base GU10 Wattage 10 Warranty 2 Year Guarantee Downloads Product Manual Frequently Asked What bulb does it take? The Focus takes a single GU10 mains-voltage bulb up to 10W maximum. Bulbs are sold separately. Most users pair this with a GU10 LED between 5-7W and 3000K-4000K depending on whether warm or neutral white light is needed. Can the spotlight head be adjusted after installation? Yes. The head swivels horizontally through approximately 350 degrees and tilts vertically through 90 degrees from the mounting joint, allowing the beam to be redirected at any time without tools. Is it suitable for bathrooms or kitchens near sinks? The IP20 rating means this spotlight is designed for dry indoor environments only. It can be used in kitchens away from direct water exposure but is not rated for bathroom zones or areas where moisture or splashing is likely. What's the beam spread? Beam angle depends on the GU10 bulb fitted. Narrow 25-35 degree beams suit accent lighting and displays, while 60-120 degree wide-flood beams suit task lighting over kitchen worktops and desks.
Related
Related
Related
Related