Turn your event setup into a colourful little shopfront with this Foldable Display Awning, designed to fit compatible 30cm x 30cm cube display systems. Perfect for markets, conventions, planner events and artist alleys, this decorative awning adds height and personality to your setup while helping to create an eye-catching space for customers to browse. Each awning is printed to order in the UK and can be customised in one, two, three or four colours to suit your branding. Multiple awnings can also be placed side by side to create a continuous canopy across a wider display. Product Details Designed for compatible 30cm x 30cm cube display systems Fits into standard compatible cube connectors Creates a colourful shopfront style appearance Decorative scalloped edge sits at the front of your display Multiple awnings can be connected side by side Folds flat for easier transport and storage Available in one, two, three or four colour combinations Printed to order using high quality PLA filament Designed by SANDOIK Compatibility This awning is designed to fit compatible 30cm x 30cm cube display systems. It fits into standard compatible cube connectors, so it can be used with SANDOIK connectors or connectors from other compatible 30cm cube systems. The awning is designed to sit across the front of your display with the decorative scalloped edge facing forwards. Compatible cube connectors are required and are not included. Creating a Wider Canopy Multiple awnings can be positioned side by side and clipped together to create a continuous canopy across a wider stall or display. When creating a larger overhead display, make sure your cube system is securely assembled and has suitable support underneath. For additional stability across larger setups, adjoining cube sections can also be secured together using cable ties alongside the compatible cube connectors. Choosing Your Colours Every awning is printed to order, allowing you to choose a colour combination that suits your branding or display. You can choose between one and four colours. The frame and clip-on support legs will be printed in Colour A, with the canopy colours arranged in the pattern shown in the product images. After placing your order, I'll email you with the current filament options so you can confirm your colour choices before printing begins. Assembly Your Foldable Display Awning is supplied as a flat-pack kit and requires assembly before use. The main frame is made up of four pieces which slot together like a puzzle. Four clip-on support legs are also included and attach to the completed frame. For the best fit, I recommend lightly filing the connecting parts if required before assembly. A small rubber mallet can also be useful for gently tapping the pieces securely into place. Always protect the printed surface while doing this. The four main frame pieces must be glued together to create a secure and long-lasting display. A good quality cyanoacrylate super glue is recommended. Suitable options include Gorilla Super Glue, Loctite Super Glue, Everbuild Super Glue or another adhesive clearly marked as suitable for PLA or rigid plastics. Please follow the glue manufacturer's instructions and allow the adhesive to cure fully before attaching the awning to your display. Folding and Storage The canopy folds flat to make the awning easier to transport and store between events. The awning must be removed from the cube connectors before it is folded away. The glued frame remains assembled, while the canopy folds down into a more compact shape for packing and storage. What's Included? Four main frame pieces Four clip-on support legs Glue, cube panels, cube connectors, display products and any other accessories shown in photographs are not included unless otherwise stated. Care and Important Information Designed by SANDOIK and produced under commercial licence. Printed using high quality PLA filament. This awning is a decorative display feature and is not designed to support hanging items or additional weight. Suitable for indoor and outdoor events, but care should be taken around prolonged heat and strong direct sunlight. PLA may soften or warp if left in high temperatures, direct sunlight or a hot vehicle for extended periods. Make sure the supporting cube display is securely assembled before attaching the awning. Fine layer lines and small variations are a normal part of the 3D printing process. Colours may vary slightly depending on your screen and the filament used. .suteki-product-description { line-height: 1.65; } .suteki-product-description > p { margin: 0 0 1rem; } .suteki-product-sections { margin-top: 1.5rem; } .suteki-product-sections details { margin: 0 0 0.8rem; border: 0; } .suteki-product-sections summary { position: relative; display: flex; align-items: center; min-height: 52px; padding: 0.9rem 3rem 0.9rem 1rem; background: #f8e3ed; border: 1px solid #edcbdc; border-radius: 10px; font-weight: 700; line-height: 1.3; cursor: pointer; list-style: none; transition: background-color 0.2s ease, border-color 0.2s ease, box-shadow 0.2s ease; } .suteki-product-sections summary:hover { background: #f5d8e6; border-color: #e6b8cf; box-shadow: 0 2px 8px rgba(0, 0, 0, 0.06); } .suteki-product-sections summary::-webkit-details-marker { display: none; } .suteki-product-sections summary::after { content: "⌄"; position: absolute; right: 1rem; font-size: 1.4rem; transition: 0.2s; } .suteki-product-sections details[open] summary { border-radius: 10px 10px 0 0; background: #f5d8e6; } .suteki-product-sections details[open] summary::after { transform: rotate(180deg); } .suteki-section-content { padding: 1rem; border: 1px solid #edcbdc; border-top: 0; border-radius: 0 0 10px 10px; background: #fff; } .suteki-section-content p:first-child { margin-top: 0; } .suteki-section-content p:last-child { margin-bottom: 0; } .suteki-section-content ul { padding-left: 1.25rem; } .suteki-section-content li { margin-bottom: 0.45rem; } .suteki-section-content li:last-child { margin-bottom: 0; }
