Malone FoldAway-5™ Multi-Rack Folding 1 or 2 Kayak Carrier A carrier system that handles a single kayak, two stacked kayaks, a canoe, a large sit-on-top, or a standup paddleboard without swapping hardware is a genuinely versatile tool for paddlers who own more than one type of boat. The Malone FoldAway-5 is a multi-configuration folding carrier built around a pair of quick-release fold-down frames with removable two-boat extension modules. In J-style mode it carries a single recreational or touring kayak on its side. With the extension modules installed it stacks two kayaks vertically, accommodates a wide canoe or large sit-on-top, or supports a SUP using the included foam insert pads for hull protection. The fold-down frames collapse to 3.5" tall for low-clearance parking and storage when the boats come off. Corrosion-resistant coated steel construction with oversized padding and heavy-duty moulded parts is built for years of regular use across Canadian paddling seasons. Universal mounting adapters fit round, square, and oval load bars from most factory and aftermarket rack systems, and two bolt lengths cover the range of bar profiles. Four 11' cam buckle load straps and four sets of bow and stern safety lines are included for a complete two-boat rooftop transport setup. Note: Bow and stern safety tie-downs are required for all Malone rooftop transports. Always refer to Malone's Fit Guide for approved vehicle fit before installing. Load capacity: 75 lb per boat, up to 2 boats Deployed dimensions: 19.5" x 8.5" x 14" Folded dimensions: 19.5" x 8.5" x 3.5" Weight: 14.5 lb Fits load bars up to 1.5" tall x 3.5" wide Universal fit for round, square, and oval load bars Includes removable MultiRack extension modules and SUP foam pads Includes four 11' cam buckle load straps and bow and stern safety lines Lifetime Limited Warranty Installation: Always refer to Malone’s Fit Guide for proper, correct and approved vehicle fit. Bow and stern safety tie-downs are required for all Malone rooftop transport(s). Failure to correctly install and use safety tie-down lines voids all warranty and liability. Carefully review instructions and register your warranty prior to first time use. Malone carriers come with two lengths of mounting bolts in order to achieve the best cross bar fit. Retain unused bolts for future use with different cross bars. The carrier base has a rectangular "cutout" for square cross bar fit. The "cutout" will not affect the fit or function when installed to round or oval cross bars. Optional longer length mounting bolts sold separately What’s In The Box: (2) Fold-Down Carriers (2) MultiRack Extension Modules (16) M6 x 1mm zinc coated 60mm Mounting Bolts (16) M6 x 1mm zinc coated 75mm Mounting Bolts (16) M6 T-Knobs (8) Universal Mounting Brackets (2) SUP Foam Blocks (4) 11' Cam Buckle Load Straps (4) Bow and Stern Safety Lines w/ S-Hooks (1) Instruction Manual
