Ziggy Link allows Forbidden Druid and Dreadnought owners the ability to apply the business up front, party out back mixed wheel size approach to their bikes. Replacing the lower link from the two-part Rate Control linkage, Ziggy Link re-calibrates the geometry to accept a smaller 27.5in rear wheel and immediately converts your 29'er Druid or Dreadnought into a mullet sporting corner slayer. We all know that 29" wheels are fast, but hitting corners and linking turns on a Ziggy Link equipped bike is a feeling that needs to be experienced. Delivering increased reaction times and a heightened ability to change direction and adapt to the trail ahead. Opening the Druid or Dreadnought up and letting things get wild while remaining relaxed and composed is eye-wateringly fun. What tools are required to install the Ziggy Link?Torque wrench (up to 14Nm)5 & 6mm Allen torque bits5 & 6mm Allen keysWaterproof greaseCan a home mechanic install the Ziggy Link?Yes, it’s a fairly straightforward job for a competent home mechanic and there are no bearings in the lower link, but due to the nature of a suspension linkage, it is imperative that torque settings are adhered to. We, therefore, recommend that work should not be attempted without a torque wrench and the knowledge to use it accordingly. For a professional shop mechanic, this is a quick and simple job so it should be a quick turnaround at your local bike shop.Can you run a 27.5" front wheel?Categorically no and doing so will void your warranty.Does the Ziggy Link change the Druid’s geometry?We have offset any changes to the kinematics but the geometry is marginally lower and slacker.(Druid) Is the Ziggy Link compatible with my hardware?The Ziggy Link is only compatible with V2 Linkage hardware. If your Linkage has black aluminum shafts, you're good to go! If you're not sure, send us an email and we can get you sorted: [email protected]
