Force 32 1/8 Buggy/Truggy Nitro Engine w/Pullstart FE-3201. Features Unique pull start pin design allows conversion to non-pull start by purchasing different rear engine covers- ABC cylinder & piston set-Aluminium piston, Brass cylinder liner with Chrome plating on the cylinder Improved porting for higher torque and RPM power Competition slide valve carburettor Oversized cylinder head for efficient cooling. Includes Ofna Force .32 cu in (5.2cc) Pull Start Nitro Engine with instruction sheet Rubber exhaust gasket Collet and 3x6mm socket head screw to hold clutch assembly to crankshaft Requires Fuel: Car fuel with 20% nitro content Glow Plug: Long, without idle bar. Specifications Displacement: .32 cu in (5.2cc) Exhaust: Rear Bore: 19.5mm Stroke: 17.5mm Liner : ABC Number of Ports: 6 Crankshaft: 14.0mm SG (pilot) shaft Piston: Fully CNC-machined aluminium alloy Connecting Rod: 7075 aluminium double bushing Claimed Output: 3 @ 33,000RPM Max RPM: 36,000 Needle Settings: Main: 3-3-1/2 turns from closed. Low Speed: Flush with ball end Barrel Stop Screws: 1/16" gap to start new engine Distance Between Mounting Holes Same Side: 0.83" (21mm) Distance Between Mounting Holes Opposite Side: 1.5" (38mm) Height Bottom of Mounting Tabs to Top of Cylinder Head:4" (102mm) Width at Mounting Tabs: 1.8" (45.8mm) Width of Crankcase Below Mounting Tabs: 1.2" (30mm) Distance from Pull Start to Front Bearing: 3.3" (84.3mm) Distance from Centre of Engine to Front Bearing: 1.8" (45mm) Distance from Centre of Engine to Pull Start: 1.5" (39mm)
