Form Cure (2nd Generation) precisely combines heat and 405 nm light to deliver tough, strong prints with unprecedented speed and consistency. Now you can post-cure Form 4/B prints in as little as 60 seconds, with 4x more UV power, 5x faster heat-up times, and a 1.3x larger chamber. To begin curing, just select a validated preset for Formlabs 45+ materials. Advanced users can customize time and temperature to fit their specific needs. Post-curing completes the chemical reaction started during printing, enhancing final part strength, toughness, heat resistance, and creep resistance while creating a harder, less tacky surface. For biocompatible materials, post-curing is necessary to achieve the safety standards determined by regulatory agencies. Cure Most Parts in 60 SecondsRapid UV curing and instant heat up for consistent, validated results and effortless post-curing of large Form 4 prints. Blazing Fast Curing, Nearly Instant Heat Up TimePost-cure general purpose resins in just 60 seconds or cure engineering resins in less than 15 minutes with just 60 seconds required to heat to 60 °C (230 V version). Consistent, Validated Results48 LED array and convective heating system ensure uniform UV and heat exposure, delivering 14.5 mW/cm² irradiance and a maximum temperature of 100 °C. Post-Cure Large Form 4 PrintsDesigned to fit any part on the Form 4, enabling curing of parts up to 200 x 125 x 245 mm on a 235 mm turntable. Easier than EverSleek new design with pre-programmed cure cycles, an easily cleaned glass turntable, and side-hinged door to allow easy access within a compact footprint. Blazing Fast CuringForm Cure (2nd Generation) is engineered to deliver rapid, consistent, and high-quality post-curing results. Near instant heat-up: 60 °C in 60 seconds80 °C in 150 seconds Fast curing: General Purpose Resins in 60 secondsEngineering & Biocompatible Resins in 3-15 minutes Precise and Consistent ResultsReach temperatures up to: 100 °CUniform irradiance of 14.5 mW/cm2 Fit Large Form 4 Parts235 mm rotating turntable245 mm maximum part height Form 4 Workflow in MinutesForm Cure is a part of a 3D printing ecosystem that’s easy to learn and use and requires little intervention or maintenance. Watch the video to learn the basics of how to use Form 4, from the software and materials to printing and post-processing.
