Fosroc Conbextra EP10 is mixed on site by combining the two components and poured into the prepared gap. Its low viscosity allows it to flow freely into very thin sections from 0.25mm upwards, ensuring complete surface contact and bond without shrinkage. Its low creep characteristics under sustained loading and resistance to repetitive dynamic loads make it the preferred choice for precision machinery grouting where movement, vibration and chemical exposure are ongoing concerns. Benefits Gap thickness range: 0.25mm to 10mm Low creep under sustained loading Can withstand repeated cycles of vibration, impact or movement without breaking down or losing its bond. Rapid strength gain Resistant to a wide range of chemicals High compressive, tensile and flexural strengths Good to know Preferred choice for precision machinery grouting where movement, vibration and chemical exposure are ongoing concerns. Typical applications; grouting under baseplates, crane rails and transporter rails, anchoring of steel bars, Electroplating and chemical plants Two-component low viscosity unfilled epoxy resin system Conforms to BS EN 1504-3 and BS EN 1504-6 Supplied as 1.5 litre pack — 1.353kg Base / 0.344kg Hardener
