The Velaworks DTC Series DIY Front Slam Kit provides everything you need to get the maximum drop on factory control arms. This kit allows you to mount the air bag directly to the control arm and upper bag bracket. By installing this kit, you will increase your drop by 2 inches. Pair this kit with a 2.5" Drop spindle to lay your truck out on control arms. Fitment: This can be used on C10s 1963-1987. 2 ea - Rings - 8.25" I.D. .188 wall2 ea - Round Plate with 3/8" center hole - 3/16"2 ea - Adjustable Upper Plate - 3/16"Hardware Kit:8 ea - Grade 8 Hex Flanged Bolts8 ea - Grade 8 Hex Flanged Lock Nuts DIY "Welder Series" Natural finishRequires Fabrication Skills & Extensive Welding - These do NOT bolt in.(airbags NOT included) Hardware to install bags is sold separately. 3/8x1” coarse thread grade 8 bolts recommended for front upper and lower bag. Lower bolt on trailing arm will require a longer bolt (usually 3 1/2” but measure the thickness of your trailing arm and add 3/4”) If you have any questions feel free to contact us via email.
