Cargo Bed Slide (Large) by Front Runner Digging through a full ute tray for the one thing you actually need gets old fast. Front Runner's Cargo Bed Slide (Large) pulls your gear right out to the tailgate instead of making you climb in after it, sliding out on nylon wheels and sealed bearings so it moves smoothly even fully loaded. It's rated to 500kg evenly distributed when locked closed, and 350kg evenly distributed when extended, so it's built to carry real load, fridges, tool boxes, recovery gear, whatever your setup needs. The slatted deck uses the same T-slot spacing as Front Runner's roof racks, so tie down rings, Wolf Pack Pro brackets and cargo chocks bolt straight on. It extends out to 113.5cm and locks in three positions: open, partially open or fully closed. Heat-treated aluminium and mild steel with a black powder-coated finish keep it holding up to years of touring and work use, and it'll bolt or riv-nut into most utes, though it's worth checking the load bed size against the specs before you order since not every tray size is compatible. Features Sliding platform brings stored gear within easy reach Rated to 500kg evenly distributed closed, 350kg evenly distributed extended Load area of 170.5cm x 81.9cm, extends up to 113.5cm Three locking positions: open, partially open, closed Ergonomic handle for single-handed operation High-strength nylon wheels and sealed bearings for smooth extension T-slot slatted deck compatible with Front Runner tie down rings, Wolf Pack Pro brackets and cargo chocks Heat-treated aluminium and mild steel construction with black powder-coated finish Specifications Materials: Anodised silver and black powder-coated high strength steel Closed dimensions: 1790mm (70.5") L x 1025mm (40.4") W x 140mm (5.5") H Internal dimensions: 1705mm (67.1") L x 819mm (32.2") W x 40mm (1.6") H / 85mm (3.5") H from load bed Maximum extension: 1135mm (44.7") L Weight: 63kg Load Rating Closed: 500kg evenly distributed Load Rating Extended: 350kg evenly distributed Important Information Drilling required during installation; bolt-through and riv-nut options available Only compatible with certain load bed sizes; confirm fitment against specifications before ordering Bin liners may need to be removed for installation What's Included Cargo Bed Slide Bottom Frame (Large) Cargo Bed Slide Tray (Large) Fitting instructions Fitment guide SSBS019 Fitting Instructions Video Frequently Asked Questions What's the load rating on the Large Cargo Bed Slide? 500kg evenly distributed when closed, 350kg evenly distributed when extended. How far does the Large Cargo Bed Slide extend? Up to 113.5cm. Will the Cargo Bed Slide fit any ute tray? Only certain load bed sizes; check the specifications to confirm fitment before ordering. Does installing it require drilling? Yes, though bolt-through and riv-nut installation options are both available. What's the load area of the Large Cargo Bed Slide? 170.5cm x 81.9cm. Can I fit tie down points to the slide? Yes, the T-slot deck is compatible with Front Runner tie down rings, Wolf Pack Pro brackets and cargo chocks. How much does the Large Cargo Bed Slide weigh? 63kg. Do I need to remove my tray's bin liner to fit this? If your vehicle has a bin liner fitted, it may need removing during installation.
