Advanced Engine Suite II (AES II) is a multi-function management system suitable for application in airplanes equipped with Internal Combustion Engines. Using the VBAT (XT30) power input port, users only need to use one battery to power all connected devices; eliminating the trouble of providing an independent power supply for the ignition control unit. AES II also adopts a safety solution to avoid potential risks caused by interference between the connected ignition and receiver devices. The AES II module is equipped with a wealth of sensor interfaces, including 2 RPM sensor ports, 1 flow meter sensor port (sensor sold separately), and 5 temperature sensor ports (Sensors are required to be purchased separately. Sensor options: TEMS Temperature Sensor [04100427], Flowmeter [03040703] ). In addition, AES also provides 2 AD ports, allowing users flexibility in the use different types of AD devices required in your airplane. At the same time, the FBUS/S.Port feature of the connected receiver, allows users to monitor the telemetry data in real-time on the transmitter. Features: Ignition Battery Eliminator Design (Independent battery is NOT needed.) Anti-interference Protection between Ignition & Receiver Parts 5 Ports for Temperature Sensors2 Ports for RPM Sensors2 Ports for AD/RPM Sensors1 Port for Flowmeter Sensors(Sensors are required to be purchased separately. Sensor options: TEMS Temperature Sensor [04100427], Flowmeter [03040703] ) 1 Power Port for Receiver 1 Power Port for Ignition Kill Switch Unit Signal Input Ports for FBUS/S.Port (Auto Recognition), SBUS, and PWM 1 Battery Input Port with XT30 Connector (Input Range: 4.5-13V) Real-Time Configuration Capability (by S.Port of ETHOS radio or FBUS capable receivers) Specifications: Dimension: 50×46.4x18mm (L×W×H) Weight: 53.5g Battery Voltage Input Range: 4.5-13V Battery Input Connector: XT30 IGN (Ignition Port) Voltage Output Range: 4.5-13V (Sync with the input voltage settings of VBAT.) Operating Current: 20mA@5V Signal Voltage Level– RPM1/RPM2 Port: 3V-12V (Requires the driven current＞5mA)– Flow Port: 3.3V– AD1/AD2 Port: 0-3.3V Fuel flow sensor sold separately.
