The Archer Plus Series receivers include new features like an enhanced anti-RF-Interference capability can offer a more improved RF performance, and this is in addition to existing anti-interfere performance in the spark ignition process. These Plus series receivers support both ACCESS and ACCST V2 D16 modes, where the RF protocol is automatically matched during the binding process to the radio. With a Black-Box function, some basic flight data like Power & Signal information can be stored for later analysis. The Archer Plus SR10+ is a gyro-stabilized receiver with a built-in 3-axis gyroscope and 3-axis accelerometer and feature multiple flight modes (Auto-level, Stabilization, Knife-Edge, etc.) and configuration methods. The SR10+ receivers have 10 configurable channel ports when using Ethos and ACCESS. Each channel port can be assigned as PWM, SBUS, FBUS, or S.Port.The SR10+ supports full-range signal strength with dual detachable antennas and guarantees optimal antenna reception and range. The SR10+ can be used as a Primary receiver in a redundant solution by setting a port as SBUS In and connecting to any other FrSky receiver equipped with an SBUS Out port. With the FBUS protocol, the Archer Plus series receivers can open up the possibility of seamlessly pairing with multiple telemetry devices (XACT servos, ADV Sensors, etc.) as well as simplifying the builds setup. Other awesome features include configurable telemetry power, Anti Spark Ignition Interference for you gassers and vibration resistance. Features: Enhanced Anti RF-Interference capability with more solid RF performance Smart-matched ACCESS & ACCST V2 D16 modes Supports basic Black-Box function Built-in 3-axis gyroscope and 3-axis accelerometer sensor Multiple flight modes and configuration tools (ETHOS, LUA scripts, etc.) 10 configurable channel ports* (PWM, SBUS, FBUS, or S.Port) Supports signal redundancy (SBUS In) Full control range with telemetry (S.Port or FBUS) Anti-interference capability in the spark-ignition process Over-The-Air (OTA) FW update* External battery/device voltage detection Specs: Dimension: 46.5*26.3*14.7mm (L*W*H) Weight: 13g 10 Configurable Channel PortsCP1: PWM / SBUS Out / FBUS / S.Port / SBUS InCP2-10: PWM / SBUS Out / FBUS / S.Port SBUS Out (Supports 16CH / 24CH mode) Operating Voltage Range: 3.5 -10V Operating Current: ＜100mA@5V Control Range: Full range* with telemetry(*Full Range: ＞2km, range may vary based on local conditions.) Voltage Measurement Range via AIN2 (External device): 0-35V(Battery Voltage Divider Ratio: 1:10) Compatibility: FrSky 2.4GHz ACCESS / ACCST V2 D16 capable transmitters
