BUILT TO ORDER - 8-12 weeks until shipment Please Watch This Full Install Instructional Video UPDATED Model - These headlights now include the latest LED projectors. Performance and reliability is far superior to the last generations HID projectors. The LED projectors have no warm up time, no expensive bulbs to replace, less parts, increased reliability and more light output. The 3rd Gen 4Runner Quad Projector Headlights Due to popular demand, we are now offering fully built quad projector headlights! These headlights hold two projectors per headlight, or four in total. This effectively DOUBLES the already impressive amount of light provided by a traditional single projector retrofit (with a 35W Ballast). These projectors have a sharp cutoff line and will not blind oncoming drivers when properly aimed. All projectors have built in fans for air circulation and heat dissipation. Chose from a chrome housing with chrome shrouds or a gloss black housing with gloss black shrouds. We use brand new DEPO headlight housings with a glass front lens. Plug N Play These headlights come fully wired with new wiring harnesses. Simply connect to a power source, plug the headlights in and aim your headlights using the adjustment knobs. Installation is a breeze! What's Included (1) Pair of Headlights (1) H4 Splitter (2) Wire Harnesses (4) LED Drivers Tools Needed For Install Phillips screwdriver 10mm and 12mm sockets or wrenches Install Instructions Remove front grille, corner lamps and filler panels Remove headlight by taking off the two 12mm nuts and two 12mm bolts holding it in Install the H4 splitter to the driver side headlight H4 connection. There is only one splitter. The passenger side H4 socket will go unused. Connect wire harnesses to a fused power source and route the wiring to both sides of vehicle. Connect the H4 ends of your wire harnesses to the H4 splitter. Install the relay in an upright position. Install new headlights and connect headlights to the new wire harnesses. There are two plugs for each projector. One plug supplies power while the other (smaller plug) controls high beam activation Reinstall two 12mm nuts and two 12mm bolts to secure the headlights. Reinstall the filler panel, corner lamp and the front grille. Adjust the beam pattern on level ground by turning the two 10mm adjustment nuts on the backside of the headlight. Tightening the bottom 10mm nut will cause the headlight to angle downwards whereas loosening it will cause it to angle upwards. The top nut will control left/right motion. Ensure that the beam pattern angles slightly downwards so as not to blind oncoming drivers. Enjoy! Disclaimer and Important Info All sales are final. Order cancellations are not allowed for this product. Headlights are BUILT TO ORDER and take approximately 8-12 weeks to ship. Lead times frequently change and are subject to change. 1 year warranty for headlights. Warranty only covers normal usage. Abuse off-road or submergence underwater is not covered by the warranty. We cannot guarantee a completely scratch free finish for chrome headlight options. Due the extensive nature of modification required, the factory chrome may receive some very small blemishes. Please refer to your local laws on the legality of modifying your headlights. Off road use only.
Related
Related
Related
Related